Results 51 to 60 of about 241,356 (307)
Advanced Engineering Materials, EarlyView.This study examines how several molten high‐silicon electrical steels interact with both conventional and recycled MgO–C refractories. For this, various immersion experiments are conducted. In addition to infiltration, a number of mechanisms are identified and explained that control the corrosion of the refractory material.
Lukas Neubert +7 more
wiley +1 more source
Analisys of Corrosion Behavior of Ti-15Mo Alloys
International Journal of Electrochemical Science, 2012 The Ti-15Mo alloys have been studied by using electrochemical measurements. The electrochemical test was made to analyze their resistance and predictability to corrosion from green dust samples, SPS samples and arc-melt alloying.
C.G. Nava-Dino +7 more
doaj +1 more source
Advanced Engineering Materials, EarlyView.Microstructural evolution and hardness optimization along the cross‐section of friction stir welded AA6061/AlSi10MgMn joints, for electric vehicle battery housings, were investigated. Postweld aging between 170°C and 220°C enhances hardness uniformity within the nugget zone.
Emanuele Ghio, Emanuela Cerri
wiley +1 more source
Effects of serum proteins on corrosion behavior of ISO 5832–9 alloy modified by titania coatings [PDF]
, 2014 Stainless steel ISO 5832–9 type is often used to perform implants which operate in protein-containing physiological environments. The interaction between proteins and surface of the implant may affect its corrosive properties.
Andrzej Leniart +23 more
core +1 more source
International Journal of Electrochemical Science, 2011 The corrosion behavior in molten salts of Inconel 718 (IN 718) superalloy was investigated by Electrochemical Impedance Spectroscopy (EIS). The corrosion test temperatures used were salt melting points of Na2SO4, 80V2O5-20Na2SO4, NaVO3 and natural ash ...
J.L. Trinstancho-Reyes +7 more
doaj +1 more source
Materials Research Express, 2021 CO _2 corrosion is an inevitable problem of marine riser steel for oil and gas transportation. In the following work, the corrosion behavior was revealed in terms of microstructure characterization, corrosion kinetic curves, morphology and phase ...
Dazheng Zhang +7 more
doaj +1 more source
Advanced Engineering Materials, EarlyView.In this experimental study, the mechanical properties of additively manufactured Ti‐6Al‐4V lattice structures of different geometries are characterized using compression, four point bending and fatigue testing. While TPMS designs show superior fatigue resistance, SplitP and Honeycomb lattice structures combine high stiffness and strength. The resulting
Klaus Burkart +3 more
wiley +1 more source
Improving the Protectiveness of 3-Mercaptopropyl-Trimethoxysilane Coatings on Bronze by Addition of Oxidic Nano- and Microparticles [PDF]
, 2020 The protectiveness of coatings based on 3-mercaptopropyl-trimethoxysilane (PropS-SH) applied on bronze artworks was enhanced by investigating and tuning a variety of factors.
BALBO, Andrea +4 more
core +1 more source
Corrosion Behavior of Galvannealed Steel
Journal of the Metal Finishing Society of Japan, 1970 Corrosion behavior of galvannealed steel was studied under various corrosive circumstances and was compared with that of galvanized or electrogalvanized steel.The results obtained were as follows:1) The corrosion rate of galvannealed steel was lower than those of other zinc plated steels.2) The coating layer of the galvannealed steel was composed of Fe-
Katsuyoshi YOSHIDA +2 more
openaire +2 more sources
Corrosion Behavior of Titanium Dental Implants with Implantoplasty
Materials, 2022 The procedure generally used to remove bacterial biofilm adhering to the surface of titanium on dental implants is implantoplasty. This treatment is based on the machining of the titanium surface to remove bacterial plaque. In this study, we used 60 grade 4 titanium implants and performed the implantoplasty protocol.
Pablo Lozano +6 more
openaire +5 more sources