Results 1 to 10 of about 95,061 (247)

Corrosion resistance of Cu-Fe deformation processed in situ alloy in chloride ion environment

Electrochemistry Communications
To assess the corrosion resistance of Cu-Fe deformation in situ alloys in a chloride ion environment, Cu-Fe alloys with varying Fe contents (5 wt%, 10 wt%, and 14 wt%) were prepared using vacuum induction melting, and the impact of Fe content on the ...
Lin Xu, Jin Zou, Si-qi Zeng, Jun-wei Liu, Ke-ming Liu, Qiang Hu, Guo-jie Huang   +6 more
doaj   +2 more sources

Study on High Temperature Resistance and Process of Tin Coating [PDF]

Cailiao Baohu, 2023
Aiming at the problems such as high temperature shrinkage and discoloration of tin plating on copper-based lead frames, as well as poor resistance to salt water corrosion at room temperature, different electroplating processes were used to analyse the ...
LIU De-qiang, ZHOU Sheng-feng
doaj   +1 more source

Study on Densification and Corrosion Resistance of Conversion Coatings on Magnesium Alloy Wheel Hubs Surface [PDF]

Cailiao Baohu, 2021
In order to improve the corrosion resistance of magnesium alloy wheel hub, a low - cost, environmentally friendly and corrosion - resistant conversion coating was prepared on the surface of magnesium alloy wheel hub.
HE Wei - li, ZHANG Qing - feng, SUI Li - ming, LUO Xin - min
doaj   +1 more source

Amorphous alloy reinforced Cu-based immiscible coatings by laser melting deposition: Separation mechanism and corrosion behavior

Materials & Design, 2023
In order to clarify the effect of Fe-based amorphous alloy on the separation mechanism and corrosion behavior of Cu-based immiscible coatings, 10 wt% Fe-based amorphous powder was designed into 90 wt% pure Cu powder to produce the amorphous alloy ...
Shengfeng Zhou, Junjie Yang, Cheng Deng, Jianbo Jin, Lianxi Hu, Yang Lu   +5 more
doaj   +1 more source

Cracking mechanism and control of Hastelloy X prepared by laser powder bed fusion

Journal of Materials Research and Technology, 2022
In this study, orthogonal experiments were carried out under different processing parameters to tackle the cracking issue of Hastelloy X (HX) fabricated by laser powder bed fusion (LPBF).
Jun Hu, Yunlong Hu, Cunxiao Lan, Qiang Zhang, Feng Jin, Wei Li, Xin Lin, Weidong Huang   +7 more
doaj   +1 more source

STRUCTURAL PARAMETERS OF CONCRETE CORROSION RESISTANCE [PDF]

Journal of Engineering Science (Chişinău), 2021
This article describes the problem of corrosion of concrete at the enterprises of the wine and fruit and vegetable industry in Moldova, the kind of organic acids that destroy concrete are considered. Such a specific type of chemical corrosion as leaching
ELETCHIH, Albina
doaj   +1 more source

The oxidation behavior of a ductile Hf0.5Nb0.5Ta0.5Ti1.5Zr refractory high-entropy alloy in pure oxygen condition at 500–900 °C

Journal of Materials Research and Technology, 2023
In this study, the oxidation behavior of Hf0.5Nb0.5Ta0.5Ti1.5Zr refractory high-entropy alloy (RHEA) was investigated at temperature range of 500–900 °C in pure oxygen condition, and the oxidation mechanism was systemically discussed.
Y.Z. Wang, N. Gao, X.W. Liu, W.M. Chen, H.T. Zheng   +4 more
doaj   +1 more source

Reliability Evaluation Based on Mathematical Degradation Model for Vacuum Packaged MEMS Sensor

Micromachines, 2022
Vacuum packaging is used extensively in MEMS sensors for improving performance. However, the vacuum in the MEMS chamber gradually degenerates over time, which adversely affects the long-term performance of the MEMS sensor. A mathematical model for vacuum
Guizhen Du, Xianshan Dong, Xinglong Huang, Wei Su, Peng Zhang   +4 more
doaj   +1 more source

Nano Serpentine Powders as Lubricant Additive: Tribological Behaviors and Self-Repairing Performance on Worn Surface

Nanomaterials, 2020
Natural serpentine powders are applicable as additives for various lubricating oils. However, no uniform theories explain their tribological performance, lubrication, and wear mechanism, especially their self-repairing mechanism. Herein, the influence of
Binbin Wang, Zhaodong Zhong, Han Qiu, Dexin Chen, Wei Li, Shuangjian Li, Xiaohui Tu   +6 more
doaj   +1 more source

Effects of Powder Feed Rate on Formation of Fully Equiaxed β Grains in Titanium Alloys Fabricated by Directed Energy Deposition

Metals, 2020
A near β titanium alloy, Ti5Al2Sn2Zr4Mo4Cr, was fabricated by directed energy deposition (DED) with different powder feed rates to investigate the formation of fully equiaxed β grains.
Qiang Zhang, Siyu Zhang, Min Zheng, Yongchao Ou, Shang Sui, Jing Chen, Xiaojian Wang, Wei Li   +7 more
doaj   +1 more source