Results 51 to 60 of about 321,633 (209)
Finite element analyses of fatigue crack growth under small scale yielding conditions modelled with a cyclic cohesive zone approach [PDF]
, 2013 Mode I fatigue crack growth is modelled and investigated with a cohesive zone approach. A 2D finite element boundary layer model under plane strain and small scale yielding conditions is used to generate fatigue crack growth rate curves ...
Kuna, Meinhard, Roth, Stephan
core
Some practical crack path examples [PDF]
Fracture and Structural Integrity, 2007 It is well known that many engineering structures and components, as well as consumer items, contain cracks or crack-like flaws. It is widely recognised that crack growth must be considered both in designand in the analysis of failures.
Les P. Pook
doaj
Fatigue failure analysis of pin-loaded lugs [PDF]
Fracture and Structural Integrity, 2016 In the present paper, mathematical models are proposed in order to analyze the strength of pinloaded lugs with semi-elliptical crack and through-the-thickness crack.
Slobodanka Boljanović +1 more
doaj +1 more source
Actuators, 2023 Acoustic emission (AE) was monitored during stress intensity factor (SIF)-controlled high-cycle fatigue (HCF) tests on an aluminum 2024-T3 specimen with a fatigue crack growing at its center.
Roshan Joseph, Victor Giurgiutiu
doaj +1 more source
Fatigue crack growth in a particulate TiB2 reinforced powder metallurgy iron-based composite
, 2003 Fatigue crack growth behavior has been examined in a particulate titanium diboride (TiB2)–reinforced iron-based composite that had been produced via a mechanical alloying process.
Sinclair, I., Yang, N.
core +1 more source
Thresholds of time dependent intergranular crack growth in a nickel disc alloy Alloy 720Li
MATEC Web of Conferences, 2014 At high temperatures in air, introducing a dwell period at the peak stress of fatigue cycles promotes time dependent intergranular crack growth which can increase crack growth rates by upto a few orders of magnitude from the rates of transgranular ...
Li Hangyue +4 more
doaj +1 more source
Metals, 2023 Weld defects such as porosity, inclusion, burn-through, and lack of penetration are difficult to detect and control effectively in an orthotropic steel deck (OSD), which will be a fatigue crack initiation site and lead to several fatigue cracking.
Yuan Luo +4 more
doaj +1 more source
Controlling fatigue crack paths for crack surface marking and growth investigations [PDF]
Fracture and Structural Integrity, 2016 While it is well known that fatigue crack growth in metals that display confined slip, such as high strength aluminium alloys, develop crack paths that are responsive to the loading direction and the local microstructural orientation, it is less well ...
S. Barter, P. White, M. Burchill
doaj
Crack-Configuration Analysis of Metal Conductive Track Embedded in Stretchable Elastomer
Micromachines, 2018 This paper reports the analysis of the crack configuration of a stretched metal conductive track that is embedded in a stretchable elastomer. The factor determining the crack configurations is analyzed by modeling as well as experiments.
Tomoya Koshi, Eiji Iwase
doaj +1 more source
Slow crack growth : models and experiments [PDF]
, 2007 The properties of slow crack growth in brittle materials are analyzed both theoretically and experimentally. We propose a model based on a thermally activated rupture process.
Ciliberto, Sergio +2 more
core +4 more sources