Results 1 to 10 of about 3,825 (166)
Force Model for Crank Group Mechanism and Analysis of Crank Arrangement
Jixie chuandong, 2019 Crank group mechanism is a planar bar mechanism with over constraint. According to the characteristics of the mechanism， the static equilibrium equations of each motion component in crank group mechanism are established. And dynamic static force analysis
Yansong Liu, Jujiang Cao
doaj +1 more source
Dynamic modelling of an intermittent slider–crank mechanism
Applied Mathematical Modelling, 2009 zbMATH Open Web Interface contents unavailable due to conflicting licenses.
Rong-Fong Fung
exaly +3 more sources
A simple approach in balancing the slider-crank mechanisms applied to new systems [PDF]
Scientific ReportsThis study presents a simple method for balancing a slider-crank mechanism which is applied to a new system. A counterweight is designed and located on the crank link to solve the vibration of slider-crank mechanism.
Van Hiep Pham +6 more
doaj +2 more sources
Engine with unconventional crank mechanism FIK1 [PDF]
MATEC Web of Conferences, 2018 The geometry and kinematics of unconventional engine mechanism FIK1 are described in the paper. Transformation of the piston linear movement to rotational movement is done by a swinging board, a baseboard and a crankshaft.
Kukuča Pavol +3 more
doaj +2 more sources
Mathematical model of a drive mechanism with a crank device of a crank press [PDF]
E3S Web of Conferences, 2020 The most important link in the forging equipment is a crank mechanism. Their significant drawback is the unbalanced inertia forces of the moving masses of the crank mechanism, which cause vibration. The analysis of the phenomena occurring in the mechanism and the assessment of the technological process are based on the theory of chains, which allows ...
openaire +2 more sources
Mechanical Performance Analysis and Experimental Study of Four-Star-Type Crank-Linkage Mechanism
Applied Sciences, 2023 Mechanical performance analysis and experimental study of the mechanics of the four-star-type crank-linkage mechanism of the marine air compressor were carried out to improve the submerged floating performance and stealth performance of the underwater ...
Kai Chai, Jingjun Lou, Yunsheng Yang
doaj +1 more source
A Synthesis of Crank-length Adjusting Mechanisms
Bulletin of JSME, 1985 Crank-length adjusting mechanisms have been proposed in order to change input-output relationships of arbitrary planar, spherical and spatial crack mechanisms and also to stop output motions of crank-and rocker mechanisms during rotations of their crack shafts. Structures of the crack-length adjusting mechanisms have been obtained by a number synthesis,
Hiroaki Funabashi +2 more
openaire +2 more sources
Kinematic and Static Analyses of the Pedaling by Means of New Slider-Crank Mechanism
Journal of Biomechanical Science and Engineering, 2007 A slider-crank mechanism whose coupler curve is the approximate ellipse is designed so that a man may perform the pedaling of the elliptical motion of the foot.
Yasuo YOSHIZAWA +2 more
doaj +1 more source
Eccentric Crank Rover: A novel crank wheel mechanism with eccentric wheels
2016 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), 2016 The crank wheel mechanism, consisting of a wheel mechanism and parallel links connected to each wheel, achieved high mobility and efficiency because it has both wheels and legs in a simple structure. However, each prior model of crank wheel mechanism has had shortcomings such as mass oscillation or fragile structure.
Hirotaka Komura +2 more
openaire +2 more sources
Proposal of the Coupled Thermomechanical Model of a Crank Mechanism [PDF]
, 2020 The aim of the paper is to propose analytical coupled thermomechanical model of the crankshaft system, which includes the mutual interaction between thermodynamic and mechanical phenomena occurring in engines. The most relevant dynamic effects observable in the crank system are connected with its kinematics.
Bogumil Chilinski, Anna Mackojc
openaire +1 more source