Results 21 to 30 of about 372,306 (310)
Deformation mechanisms in a TiNi shape memory alloy during cyclic loading [PDF]
, 2012 The deformation mechanisms governing the cyclic stress-strain behaviour of a TiNi shape memory alloy were investigated in this work. To understand the development of these mechanisms during cyclic loading, three low-cycle fatigue tests were performed and
Billota, Giovambattista +2 more
core +3 more sources
Reversible Rail Shear Apparatus Applied to the Study of Woven Laminate Shear Behavior [PDF]
, 2013 The multitude of in-plane shear tests existing in the literature seems to demonstrate the complexity of developing a test adapted to all experimental works.
Bouvet, Christophe +3 more
core +3 more sources
Cyclic Loading of Jammed Granular Systems
Materials, 2022 This article describes the cyclic loading of jammed granular systems represented by vacuum-packed particles in compression and tension, focusing on the influence of the properties of the granular material on the mechanical response. A jammed granular system is represented by a cylindrical sample filled with polymer granules (vacuum-packed particles ...
Piotr Bartkowski +3 more
openaire +2 more sources
Calculation of a lower bound ratchet limit part 2 : Application to a pipe intersection and dissimilar material join [PDF]
, 2013 In an accompanying paper in this issue a lower bound method based on Melan's theorem was derived and implemented into the Linear Matching Method ratchet analysis procedure.
Chen, Haofeng +2 more
core +1 more source
Advances in Materials Science and Engineering, 2021 To investigate the energy evolution characteristics of sandstone under static-quasi-dynamic loading rates (1.0 × 10−3, 5.0 × 10−3, 1.0 × 10−2, 5.0 × 10−2, and 1.0 × 10−1 mm/s), the uniaxial compression tests, the uniaxial cyclic loading-unloading tests ...
Zhixi Liu +5 more
doaj +1 more source
Pre-fatigue influence on quasi-static tensile properties of Ti-6Al-4V in thin-sheet form [PDF]
, 2010 The response of engineering structures to loads is most often assessed without taking possible damage of the used material(s) into account. However, it has already been proved that a preceding cyclic loading and the alteration of the microstructure it ...
De Baere, Ives +3 more
core +1 more source
Cracking in asphalt materials [PDF]
, 2018 This chapter provides a comprehensive review of both laboratory characterization and modelling of bulk material fracture in asphalt mixtures. For the purpose of organization, this chapter is divided into a section on laboratory tests and a section on ...
AF Braham +56 more
core +5 more sources
The Effects of Interlocking a Universal Hip Cementless Stem on Implant Subsidence and Mechanical Properties of Cadaveric Canine Femora. [PDF]
, 2016 ObjectiveTo determine if an interlocking bolt would limit subsidence of the biological fixation universal hip (BFX(®)) femoral stem under cyclic loading and enhance construct stiffness, yield, and failure properties.Study designEx vivo biomechanical ...
Buks, Yonathan +3 more
core +1 more source
The behaviour of remolded Batu Pahat soft clay with different OCR values under cyclic loading [PDF]
, 2017 The Batu Pahat Soft Clay, (BPSC) of Universiti Tun Hussein Onn Malaysia, (UTHM) were low in shear strength, bearing capacity, and suffer large settlements when subjected to loading.
Izzudini, Muhammad Arif Azraei +1 more
core +1 more source
Journal of Engineering, 2021 Cyclic loading-induced consolidation behavior of soft soil is of great interest for the analysis of offshore and onshore structures. In this study, an analytical solution for one-dimensional (1D) nonlinear consolidation of saturated double-layered soil ...
Pyol Kim, Chol-U Pak, Hakbom Myong
doaj +1 more source