Results 1 to 10 of about 104,078 (99)
Acta Geotechnica, 2022 AbstractSeveral constitutive models for sands are based on an additive split of the effective stress rate into two terms. One term accounts for the deviatoric stress ratio $$\varvec{r}$$ r , the other for the mean effective stress $${p}$$ p ...
Christian Carow, Frank Rackwitz
openaire +2 more sources
Environmental Challenges, 2023 Civil Engineering structures are constantly subjected to environmental forces and changes around the surroundings hence a strong need for assessment of the interaction and predictive measures that lead to pro-active actions towards the structural safety and health monitoring.
Aman Pawar +5 more
openaire +2 more sources
TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 1981 Influences of stress ratios and stress cycle frequencies on cyclic stress corrosion crack growth characteristics of a high-strength steel have been investigated. The influences of stress ratios on crack growth rate under cyclic SCC are clearly distinguished between above and below KISCC. In the range of Kmax, KFSCC≤ Kmax < KISCC, a decrease of R causes
Kichiro ENDO +2 more
openaire +3 more sources
Effects of the Change of the Maximum Stress and the Stress Ratio on the Cyclic Creep Behaviors
Bulletin of JSME, 1981 Cyclic creep behaviors of carbon steel are investigated by the true stress controlled low-cycle fatigue tests, stepwise or linearly increasing or decreasing maximum stress with a changing stress ratio. The constitutive equation proposed previously by the authors is found to be applicable to represent the strain accumulations in both increasing and ...
Fusahito YOSHIDA +2 more
openaire +2 more sources
Including the normal to shear stresses ratio in fatigue life estimation for cyclic loadings [PDF]
MATEC Web of Conferences, 2019 The paper presents the estimation of the fatigue life under multiaxial cyclic loading of two construction materials. The main aim of this paper is to present a new method which allows evaluation of fatigue life during the design and construction phase of machine elements. In paper three well known multiaxial fatigue criteria based on the critical plane
openaire +2 more sources
Cyclic creep behavior and life prediction of DZ125 alloy under different stress ratios
Journal of Physics: Conference SeriesAbstract In order to study the creep behavior and mechanism of DZ125 alloy under cyclic creep under different stress ratios, cyclic creep experiments are performed under a temperature of 850°C and peak stress of 500 MPa, with stress ratios of 0.1, 0.3, 0.5, 0.7, 0.9, and 1, and the mechanical behavior and microstructure of creep samples ...
Haowen Chen +4 more
openaire +1 more source
International Journal of FatiguePresented test results on transverse cracking in cross-ply laminates upon tension–tension cyclic loading show that the increase of crack density depends not only on the maximum transverse stress in the cycle but also on the local cyclic stress ratio RTloc in the analyzed layer.
Vivek Richards Pakkam Gabriel +3 more
openaire +3 more sources
Effect of Cyclic Stress Level and Overconsolidation Ratio on Permanent Deformation Behaviour of Clayey Subsoil [PDF]
Civil Engineering Journal, 2018 This paper presents the results of a series of one-way cyclic triaxial tests carried out to investigate the role of cyclic stress level and overconsolidation ratio (OCR) on the permanent deformation behaviour of saturated clayey subsoil during long-term cyclic loading.
openaire +1 more source
Influence of Lateral Stress Ratio on N-Value and Cyclic Strength of Sands Containing Fines
Journal of the Society of Materials Science, Japan, 2022 Kenji Harada +2 more
openaire +2 more sources
Computers and GeotechnicsVarious constitutive formulations have been developed over the years to reproduce the cyclic resistance of sands. A common challenge for existing models is the accurate simulation of the cyclic strength of sands for a wide range of initial conditions and different cyclic stress levels when adopting a single calibration. Many liquefaction models tend to
J.K. Möller +3 more
openaire +2 more sources