Results 21 to 30 of about 307 (185)
The Effect of Electropulsing Treatment on Properties of Pre-compressed AZ31 Magnesium Alloy [PDF]
Materials Research, 2020 The effect of electropulsing treatment (EPT) on quasi-static compression behavior and anisotropy of AZ31 Mg alloy were investigated based on quasi-static compression test.
Xing-xiao Zhu +4 more
doaj +4 more sources
Enhanced kinetics of microstructural evolution in Ti–6Al–4V through electropulsing treatment
Journal of Materials Research and Technology, 2023 The post-processing of Ti–6Al–4V, which has traditionally been conducted using furnace heat treatment (FHT), is crucial to attaining the optimum microstructure and mechanical performance.
Minseob Kim +6 more
doaj +2 more sources
Electropulsing treatment on UNS S32750 Duplex Stainless Steel
, 2021 Prestrained at 5% and 15% duplex stainless steel UNS S32750 specimens have been subjected to electropulsing treatments with current density of 100 A/mm2 and 200 A/mm2 and 100 and 500 pulses for each current density value. X-ray diffraction, microhardness and residual stresses were collected before and after the electropulsing treatments.
Gennari C. +7 more
openaire +3 more sources
Crystals, 2020 The influence of electropulsing treatment (EPT) parameters on the static recrystallization (SRX) microstructure in a cold-deformed Ni-based superalloy was investigated.
Hongbin Zhang +6 more
doaj +2 more sources
An Ultra-Fast Annealing Treatment by Electropulsing during Pure Copper Wire Drawing [PDF]
Metals, 2019 The influence of electropulses in situ on the drawing process of copper wires was investigated, with the aim of avoiding time consuming annealing thermal treatments. It was found that with the application of electropulses, tensile and drawing forces were reduced and the plasticity of the wire was improved. Meanwhile, compared with conventional drawing,
González Rojas, Hernán Alberto +3 more
openaire +5 more sources
Journal of Materials Research and TechnologyThis study investigated the effects of electropulsing treatment (EPT) condition on the microstructure and microhardness of cold-rolled Grade 2 Ti sheet.
Seong Ho Lee +6 more
doaj +2 more sources
Electropulsing Treatment on Enhancement of Electrical Conductivity of Screen-Printed Ag Wire
Metals and Materials International, 2019 The effect of high electric current density on the sintering of Ag wires manufactured by screen printing is evaluated through electrical resistivity analysis and microstructure observation. Different forms (continuous and pulsed) of electric current with different current densities are applied to the specimens.
Ju-Won Park +8 more
openaire +2 more sources
Journal of Materials Research and TechnologyThis study systematically investigated the effects of cryogenic and electropulsing coupling treatment (CET) at −196 °C for different durations (8h, 16h, and 24h) on the microstructure and mechanical properties of rolled Ti6Al4V alloy.
Guirong Li +6 more
doaj +2 more sources
Materials & DesignA novel high-density electropulsing treatment (ET) method was proposed to ameliorate the microstructure and mechanical properties of severe plastic deformed 1045 steel.
Zhengning Li +6 more
doaj +2 more sources
Rapid precipitation of L12 phase in Al0.5CoCrFeNi high-entropy alloy under electropulsing
Materials Research LettersA new strategy for the rapid precipitation (1.8 s) of L12 nanoprecipitates in Al0.5CoCrFeNi high-entropy alloys by electropulsing treatment (EPT) has recently been discovered. The coherent L12 phase was introduced under high temperatures by EPT, and this
Zhicheng Wu +7 more
doaj +2 more sources