Results 21 to 30 of about 3,888 (214)
CHARACTERIZATION OF AROMATIC FIBERBOARDS
Wood Research, 2021 For use as decoration panels, wood fiber was used to prepare a new type of aromatic fiberboard using hot-press technology that mixes spices and adhesives. Experiments showed that the use of different proportions of two kinds of spices, wormwood and lavender, mixed with waterborne acrylic adhesives, had a slight influence on the curing time and ...
Wei Wang +5 more
openaire +1 more source
Properties of PVA-reinforced cement-bonded fiberboards processed with calender extrusion
Science and Engineering of Composite Materials, 2015 This research investigates the application of calender extrusion as a novel technique in the production of cement fiberboards. The technique is successfully used in the production of non-structural building elements.
Pekmezci Bekir Y.
doaj +1 more source
Agronomy, 2021 While the construction industry consumes more raw materials than any other industrial sector, agriculture generates a large amount of waste that is not managed properly.
Antonio Ferrandez-Garcia +4 more
doaj +1 more source
Molecules, 2020 The main objective of this work was to further analyze the optimization of the production factors of Arundo donax L. fiberboards obtained without adhesives. The production of boards derived from Arundo donax L.
Diego Ramos +3 more
doaj +1 more source
Effects of Surface Lamination Process Parameters on Medium Density Fiberboard (MDF) Properties
BioResources, 2022 Medium density fiberboard (MDF) is widely utilized in furniture production. Most MDF in such applications has a surface laminate layer. The lamination process improves the physical and mechanical properties of the boards. The temperature, press time, and
İsmail Özlüsoylu, Abdullah İstek
doaj +2 more sources
Preparation of Glue-free Wheat Straw-based Fiberboard with Zero Formaldehyde [PDF]
E3S Web of ConferencesGlue-free wheat straw-based fiberboard has the advantages of excellent performance, such as no formaldehyde release, being renewable, and being degradable, which presents a novel approach to enhance the utilization value of straw and protect the ...
Su Qiong, Li Shuangyan
doaj +1 more source
FOURTH STATUS REPORT: TESTING OF AGED SOFTWOOD FIBERBOARD MATERIAL FOR THE 9975 SHIPPING PACKAGE [PDF]
, 2013 Samples have been prepared from a 9975 lower fiberboard subassembly fabricated from softwood fiberboard. Physical, mechanical and thermal properties have been measured following varying periods of conditioning in each of several environments. These tests
Daugherty, W.
core +1 more source
Döviz Kurundaki Yükselişin Türkiye Lif Levha Dış Ticaretine Etkisi Üzerine Bir Araştırma
Gümrük ve Ticaret Dergisi, 2023 Türkiye’nin dış ticaretinde önemli bir alanı kaplayan orman ürünleri; kâğıt, mobilya, lif levha (MDF), yonga levha, OSB, kontrtabla, kontrplak, tomruk, kereste, ambalaj gibi katma değeri yüksek eşyaları kapsamaktadır.
Abdulkadir Soygüder
doaj
BioResources, 2023 Fiberboards from scrap denim were fabricated using two different resins, melamine urea formaldehyde (MUF) and polymeric methylene diphenyl diisocyanate (pMDI). Resin content and MUF-pMDI weight ratio were studied. Physical and mechanical tests determined
Sheldon Q. Shi +5 more
doaj +2 more sources
Termite Resistant Properties of Sisal Fiberboards [PDF]
Insects, 2011 A study was carried out to test sisal (Agave sisalana Perrine) fiberboards properties as building materials against Asian subterranean termite, Coptotermes gestroi (Wasmann). Evaluation was in the laboratory according to the JWPA Standard-TW-S.1-1992.
Firda Aulya Syamani +2 more
openaire +3 more sources