Results 41 to 50 of about 2,695 (261)

Grounding Resistance and Grounding Impedance of Horizontal Bundled Conductor Grounding Electrodes.

IEEJ Transactions on Power and Energy, 2003
It is well known that increasing conductor radius of grounding electrode results in decreasing grounding resistance, but the decrease extent is very little compared with the increase extent. However, when bundled conductors are used for grounding electrode, lower grounding resistance is expected to be obtained. Thus the bundled conductors of horizontal
Takashima, Takeshi, Ohtsubo, Akira, Sakurano, Hitoshi   +2 more
openaire   +2 more sources

Electrochemical Evaluation of Compressed Selective Laser Melted AlSi7Mg and AlSi10Mg Alloys in Chloride Environment

Advanced Engineering Materials, EarlyView.
The corrosion performance of AlSi7Mg and AlSi10Mg alloys produced through selective laser melting (SLM) was examined under compressive stress in a chloride environment. Electrochemical analyses, including open‐circuit potential (OCP), potentiodynamic polarization (CPP), and electrochemical impedance spectroscopy (EIS), were complemented by scanning ...
Femi John Akinfolarin, Samson Dare Oguntuyi, Peter Apata Olubambi   +2 more
wiley   +1 more source

Novel Graphene Allocating Carbon–Copper Ratio Method for the Rail Vehicle Propulsion System Ground Carbon Brush

IEEE Access, 2022
This study proposed graphene allocating carbon–copper ratio (GACCR) for the grounding carbon brush of rail vehicle propulsion systems. The proposed GACCR is the key component of grounding apparatuses, and the system effectiveness can be enhanced ...
Liang-Yin Huang, Hwa-Dong Liu, Shiue-Der Lu, Chih-Ming Hsu   +3 more
doaj   +1 more source

Characterization of Aluminized Layers on Inconel‐738 Alloy: Microstructure, Modeling of Aluminizing Kinetics, and Thermal Behavior

Advanced Engineering Materials, EarlyView.
This study explored how effective nickel aluminide coatings are obtained in providing oxidation resistance applied to the Inconel 738 alloy, modeling with diffusion models. In the present study, kinetics and thermal behavior of the Inconel 738 alloy were studied by the low‐temperature thermoreactive aluminizing process, which was carried out at 625°C ...
Gozde Celebi Efe, Tuba Yener, Suayb Cagri Yener, Mourad Keddam, Cuma Bindal   +4 more
wiley   +1 more source

A Compact Spin‐Coated Graphene UWB Antenna for Breast Tumor Detection

Advanced Engineering Materials, EarlyView.
A compact, spin‐coated graphene ultra‐wideband patch antenna designed for breast tumor detection, capable of distinguishing between malignant and benign tumors. This innovative antenna can serve as an effective initial screening tool, particularly in resource‐limited settings such as rural areas, where access to advanced medical equipment like MRI and ...
Raja Rashidul Hasan, Shuvra Saha, Sumit Hassan Eshan, Rinku Basak, Md. Nahian Al Subri Ivan, Ahmed Murtuza Saleque, Raja Tariqul Hasan Tusher, Sadia Zabin, Md. Abdur Rahman, Yuen Hong Tsang   +9 more
wiley   +1 more source

Grounding Grid Electrical Impedance Imaging Method Based on an Improved Conditional Generative Adversarial Network

Algorithms
The grounding grid is an important piece of equipment to ensure the safety of a power system, and thus research detecting on its corrosion status is of great significance.
Ke Zhu, Donghui Luo, Zhengzheng Fu, Zhihang Xue, Xianghang Bu   +4 more
doaj   +1 more source

Fault phase selection of mine power supply system based on frequency distribution theory

Gong-kuang zidonghua, 2017
In view of the problem of ineffective selection of asymmetric mine neutral point ungrounded system while high resistance grounding occurs, a fault phase selection of mine power supply system based on frequency distribution theory was proposed. Each phase
YU Qun, CHEN Zhihui, HE Ziyua
doaj   +1 more source

Thermomechanical Fatigue and Creep–Fatigue Interaction of Inconel 718 Additively Manufactured by Laser Beam Powder Bed Fusion

Advanced Engineering Materials, EarlyView.
Thermomechanical fatigue tests of laser beam powder bed fusion (PBF‐LB) Inconel 718 show that the additively manufactured material reaches almost the lifetimes of conventionally‐rolled material under no‐dwell conditions. Introducing dwell times at the maximum temperature markedly reduces the lifetimes due to pronounced grain boundary sliding associated
Stefan Guth, Tomáš Babinský, Jan Lars Riedel, Wen Hao Kan, Aijun Huang, Martin Heilmaier, Ivo Šulák   +6 more
wiley   +1 more source

Near‐Field Electrospinning Micro‐Printhead Achieves Precise Control of Nanofiber Deposition

Advanced Engineering Materials, EarlyView.
A micro‐printhead for near‐field electrospinning enables reproducible deposition of polymer nanofibers with diameters below 50 nm. Systematic parameter studies uncover the mechanisms linking operating conditions to fiber morphology, paving the way for precise and low‐cost nanoscale 3D manufacturing.As a high‐resolution, cost‐effective, and rapid ...
Han Xu, Dario Mager, Jan G. Korvink
wiley   +1 more source

Pyramidal Structures on Yttria‐Stabilized Zirconia after High Temperature Exposure at 1500°C: New Features on an Old Material

Advanced Engineering Materials, EarlyView.
New features on yttria‐stabilized zirconia after exposure at 1500°C: Newly discovered pyramidal structures on an old material. After exposure at 1550°C on the cross section of YSZ new features, namely pyramidal structures are discovered. These structures grow with time, increase in numbers, appear as singularities, are often arranged in strings, and ...
Doris Sebold, Dylan Jennings, Robert Vaßen   +2 more
wiley   +1 more source