Results 61 to 70 of about 46,528 (305)
, 2022 Mg-13Gd-4Y-2Zn-0.4Zr (wt. %) alloy bar produced by three passes reciprocating upsetting extrusion (named as RUE-ed bar) exhibited fine grain with the average grain size of 3.02 μm.
Jianmin Yu +7 more
core +1 more source
Advanced Engineering Materials, EarlyView.New features on yttria‐stabilized zirconia after exposure at 1500°C: Newly discovered pyramidal structures on an old material. After exposure at 1550°C on the cross section of YSZ new features, namely pyramidal structures are discovered. These structures grow with time, increase in numbers, appear as singularities, are often arranged in strings, and ...
Doris Sebold +2 more
wiley +1 more source
Hot Compression Processing Map and Microstructure Evolution of a Mg–Sn–Al–Zn–Mn Alloy
, 2023 In the present study, the microstructural evolution of solid-solution treated Mg–4Sn–3Al–1Zn–0.3Mn (TAZM) was explored through hot compression tests in the temperature range of 300–460 °C and the strain rate range of 0.001–1 s−1.
Sun, Wei +3 more
core +1 more source
Materials Research ExpressLarge-tube forgings were formed using nine layers of continuous-casting billet made from 15CrNi3MoV alloy steel via additive forging. The interfacial microstructural evolution under different hot-compression bonding temperatures and strains was ...
Bing Wang +4 more
doaj +1 more source
Permanent Densification of Calcium Aluminophosphate Glasses
Frontiers in Materials, 2019 High-temperature densification of oxide glasses influences their interatomic distances and bonding patterns, resulting in changes in the mechanical and chemical properties.
Saurabh Kapoor +8 more
doaj +1 more source
Creating Ti–Fe α/β Alloys by Diffusion‐Driven Solid‐State Processing
Advanced Engineering Materials, EarlyView.This study proposes making alloys containing fast diffusing elements that are difficult to produce by ingot metallurgy, by diffusion‐driven solid‐state HIP processing of elemental powders and low‐temperature homogenisation. Here, novel Fe‐Ti α–β alloys are formed having fine α–β lamellae, a small β prior grain size without significant intermetallics ...
Jiaqi Xu +10 more
wiley +1 more source
Hot Compression Test of Heat Resistant Steel
, 2017 This article deals with the analysis of formability of heat resistant steel type 9Cr-1Mo by physical laboratory simulation - hot compression test. The 9Cr-1Mo steel belongs to modern 9%Cr tempered martensitic steel for high-temperature applications in ...
R. Bidulský +9 more
core +1 more source
Performance Analysis of Abradable Coating Systems for Aircraft Gas Turbines
Advanced Engineering Materials, EarlyView.Three CoNiCrAlY/YSZ/MgAl2O4 abradable liner configurations on a nickel‐superalloy are evaluated by thermal‐gradient cycling and incursion tests. Laser ablation of the bondcoat and/or Y2O3‐stabilized ZrO2 (YSZ) intermediate layer increases mechanical interlocking and bonding for thick topcoats.
Hanna Heyl +4 more
wiley +1 more source
Effect of Hot Compression on Mechanical Properties of Gray Iron
, 2011 Gray iron was hot-compressed on a Gleeble 3500 machine. The effect of hot compression on mechanical properties of gray iron was studied. The result shows that gray iron with the sandwich structure of graphite and ferrite matrix is prepared after more ...
Xiao Ling Yang, Xin Zhao
core +1 more source
Advanced Engineering Materials, EarlyView.Mg–Zn composites with a thickness of 0.21 mm were fabricated using roll bonding of a kirigami‐patterned Mg alloy inlay within a Zn matrix. Thermal activation following this process led to the formation of tailored intermetallic structures, which provided the composite with enhanced flexural strength.
Yaroslav Frolov +4 more
wiley +1 more source