Results 21 to 30 of about 7,886 (260)
Effects of B on the Hot Ductility of Fe-36Ni Invar Alloy
High Temperature Materials and Processes, 2019 This work conducted systematic studies on the effect of B on the hot ductility behavior of Fe-36Ni alloy over the temperature range of 900–1,200 °C by use of Gleeble-3500 thermal simulator, Thermo-Calc software, transmission electron microscopy and ...
Zheng Yaxu +4 more
doaj +1 more source
Metals, 2021 In this work, weldability and hot cracking susceptibility of five alloy 718 investment castings in laser beam welding (LBW) were investigated. Influence of chemical composition, with varying Si contents from 0.05 to 0.17 wt %, solidification rate, and ...
Pedro Álvarez +7 more
doaj +1 more source
Effect of Strain Rate on Hot Ductility of a Duplex Stainless Steel
Advances in Materials Science and Engineering, 2019 Duplex stainless steels (DSSs) often have bad hot workability. In this study, specimens of 2205 DSS were hot tensioned over a strain rate range from 0.005 s–1 to 50 s–1 to examine the hot ductility.
Zhenhua Wang, Wenyuan Ma, Chengming Wang
doaj +1 more source
Hot crack susceptibility of cast Mg97Y2Zn1
Engineering Reports, 2022 Formation of hot cracks in alloys is a critical issue for their production and processing. In this study, the susceptibility of the cast Mg97Y2Zn1 alloy containing long period stacking ordered (LPSO) structures to hot cracking was investigated using ...
Christina Krbetschek +5 more
doaj +1 more source
Metals, 2022 Cu-containing steels can suffer from hot shortness unless Ni is added to protect them but whether this problem also influences the straightening operation is not clear.
Osvaldo Comineli +2 more
doaj +1 more source
Advanced Engineering Materials, EarlyView.Mg–Zn composites with a thickness of 0.21 mm were fabricated using roll bonding of a kirigami‐patterned Mg alloy inlay within a Zn matrix. Thermal activation following this process led to the formation of tailored intermetallic structures, which provided the composite with enhanced flexural strength.
Yaroslav Frolov +4 more
wiley +1 more source
Advanced Engineering Materials, EarlyView.Identified through the use of statistical design of experiments and metallographic investigation, this study exposes the stochastic origins of intergranular cracks in blown powder laser beam directed energy deposition additive manufacturing of pure molybdenum. It further demonstrates a successful crack mitigation approach with direct correlation to the
Nathaniel J. Lies +2 more
wiley +1 more source
High Temperature Materials and Processes, 2018 Effects of lanthanum content on the solidification structure and the hot ductility of Fe-43Ni expansion alloy were investigated, the corresponding mechanisms were also discussed.
Yu Y. C, Zhang S. H, Li H, Wang S. B
doaj +1 more source
Hydrogen‐Assisted Fracture of Iron‐Based Fe–Ni–Al Alloys
Advanced Engineering Materials, EarlyView.Principal relations and fracture mechanisms of single‐phase and precipitate‐strengthened Fe–Ni–Al alloys subjected to prior electrochemical hydrogen charging are identified. The mechanisms of hydrogen effect on strength and microhardness are discussed, including hydrogen‐induced increase in microhardness and the role of hydrogen in fracture behavior ...
Nataliya Yadzhak +3 more
wiley +1 more source
Hot ductility of Cr15Mn7Ni4N austenitic stainless steel slab
Journal of Materials Research and Technology, 2020 Hot ductility tests of Cr15Mn7Ni4N austenitic stainless steel slab were performed in a Gleeble-3500 thermomechanical simulator at a strain rate of 1×10−3 s−1 and at temperatures ranging from 650 °C to 1400 °C, which are close to the continuous casting ...
Jingyu Li, Guoguang Cheng
doaj +1 more source