Results 91 to 100 of about 258,975 (214)
Maderas: Ciencia y Tecnología, 2019 Conventional kilns dominate the wood drying industry. However, energy consumption during the process of ventilation remains a significant challenge. In this study, we designed a device to recover waste heat from exhausted wet air during kiln drying.
Yang Meng +5 more
doaj
INFLUENCE OF VARIOUS OPTIONS TO BAFFLES SETUP ON AIR VELOCITY AND ITS UNIFORMITY IN A DRYING KILN [PDF]
Pro Ligno, 2015 In this study, an experimental-based comparative analysis among different options to the baffles settup in a drying kiln was carried. The experiments consisted in measuring the air velocity in different points located at the outlet face of stacks.
Bogdan BEDELEAN
doaj
Stress-based kiln drying of Gmelina arborea Roxb. Lumber
, 2016 The study evaluated the kiln drying of 25-mm thick Gmelina arborea Roxb. lumber using conditions based on changing shrinkage rates following the procedure developed by Fuller under US Patent No. 5,873,182 dated 23 February 1999.
Carmelo, Wency H. +3 more
core
A Numerical Assessment of the Air Flow Behaviour in a Conventional Compact Dry Kiln
Journal of Applied Fluid Mechanics, 2015 Convective drying is the most common drying strategy used in timber manufacturing industries in the developing world. In convective drying, the reduction rate of the moisture content is directly affected by the flow topology in the inlet and exit plenums
Paulo Zdanski +2 more
doaj
Evaluation of kiln-drying schedules for wild cherry wood (Cerasus avium)
Maderas: Ciencia y Tecnología, 2014 Wild cherry wood (Cerasus avium) lumber with a nominal thickness of 5 cm from Duzce region in Turkey was dried through conventional kiln drying using two different programs which are unprotective drying schedules, and protective drying schedules. The aim
Süleyman Korkut +4 more
doaj
Wood colour related to kiln drying
, 2000 Raised temperature in artificial drying has led to some changes of wood products such as colour and strength etc. For special treatment of wood-products with clearly modified properties, among them colour, is often high temperature and steam used industrially.
openaire +2 more sources
Timber drying using compartment kiln and solar drying / Hanisah Ismail [PDF]
, 2002 Wood must be dried before use. The methods in dry kiln are important. In stacking the timber, sticker in correct location will influence proper drying to produce good timber.
Ismail, Hanisah
core
Measurement of colour development in Pinus radiata sapwood boards during drying at various schedules
Maderas: Ciencia y Tecnología, 2014 Colour changes, such as kiln brown stain, that develop in Pinus radiata boards during kiln drying can reduce the value of the final wood products and result in significant losses due to downgrade or waste of dried wood by removing the darkened surfaces ...
Murray McCurdy +2 more
doaj
Kiln Schedule Certification for Industrial Drying of Radiata Pine
, 2013 This is a summary of a study carried out in Chile to certify industrial kiln drying of radiata pine to comply with the international phytosanitary standard ISPM 15.
Elustondo, Diego +3 more
core +1 more source