Results 31 to 40 of about 3,293 (229)
First Operation Results of a Methanol Demonstration Plant With Real Steel Mill Gases
Chemie Ingenieur Technik, EarlyView.A demonstration plant with industrial setup regarding length, diameter, boiling water cooling system and gas recycle was initially operated with cleaned blast furnace gas and compared with earlier experiments with bottle gases. Dynamic disturbances from the steel mill and gas cleaning unit were noticed and could be compensated by the control system ...
Johannes Michael Voß, Tim Schulzke
wiley +1 more source
Evaluation the effect of kiln schedule on warp and surface checking in beech (fagus orientalis Lipsky) at 5 cm thickness [PDF]
تحقیقات علوم چوب و کاغذ ایران, 2011 In this research , beech (fagus orientalis Lipsky ) lumbers at 5 cm thickness wereran domically selected and commercially cut down from sari region(Neka choobcompany) ,with three schedule namely T5-C3, T5-C4, T6-C4 were adapted fordrying the lumbers down
Yadolah Hossein poor, Vahid Tazkrrezaei
doaj +1 more source
Maderas: Ciencia y Tecnología, 2022 The aim of this study was to determine how varying the inputted surface area value of wood samples would affect the determination of kiln-drying schedules using the drastic drying test.
Daiane de Moura Borges Maria +4 more
doaj +1 more source
Thermal Degradation of PFAS in Different Scales: Measurement of Hydrogen Fluoride (HF)
Chemie Ingenieur Technik, EarlyView.The communication article is about the challenges to balance a combustor in the case of fluorine when incinerating PFAS containing materials. Several analytical methods are compared: for continuous measurement, FTIR with TDLS. The detected fluorine species are further compared with results upon IC and pyrohydrolysis for discontinuous measurements in ...
Hans‐Joachim Gehrmann +6 more
wiley +1 more source
A novel bubbling fluid bed reactor for the autothermal pyrolysis of waste plastics
The Canadian Journal of Chemical Engineering, EarlyView.Abstract A new pilot‐scale fluidized bed reactor operated under continuous conditions was developed and tested for the thermal pyrolysis of high‐density polyethylene (HDPE). The study focused on assessing the reliability and operability of the system under different operating conditions (400–550°C), while monitoring mass and energy balances, product ...
Khadija Olivia Ogoula Igouwe +4 more
wiley +1 more source
Recovery and Repurposing of End‐of‐Life Graphitic Anodes for Green Lithium‐Ion Batteries
EcoEnergy, EarlyView.This review summarizes the degradation mechanisms of spent graphite anodes in lithium‐ion batteries and highlights key recycling, regeneration, and modification strategies, including hydrometallurgical and pyrometallurgical approaches. It also discusses recent advances in surface engineering, structural regulation, and material hybridization, offering ...
Wei Wei, Weiguo Liu, Jiangqi Zhou
wiley +1 more source
Avaliação do processo de secagem de madeira em estufa com banho de vapor [PDF]
, 1997 Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro TecnologicoO presente trabalho trata da secagem artificial de madeiras tropicais em estufas. Uma revisão da teoria de processos de transporte de calor e massa na estrutura da madeira
Keine, Sandro
core
Thermoplastic‐Resin Transfer Molding Technology: Development and Challenges Toward Industrialization
Polymer Composites, EarlyView.Illustration of the key aspects involved in the manufacture of thermoplastic composites by T‐RTM highlighting the relationships between raw materials, resin mixing strategies, polymerization parameters, and processing equipment ranging from laboratory to industrial scale. ABSTRACT Driven by increasingly stringent international environmental regulations,
Filipe P. Martins +4 more
wiley +1 more source
, 1907 Patent for a kiln to be used as a drying chamber for drying and curing of lumber.
Stephens, William E.
core
THE INFLUENCE OF SOME FACTORS ON THE TIMBER DRYING PROCESS, ANALYZED BY A GLOBAL SIMULATION MODEL
Maderas: Ciencia y Tecnología, 2005 A model for the simulation of timber drying in a batch kiln has been used for the investigation of a set of different questions related to this drying process.
Jarl-Gunnar Salin
doaj