Results 61 to 70 of about 11,238 (308)

Fiber-coupling optical system for high-power and multi-wavelength diode laser bars oriented to integrated biomedical imaging systems

Results in Optics, 2021
The use of pulsed high-power diode lasers (HPDLs) in the near infrared (NIR) range as multispectral sources has attracted much interest in biomedical applications due to their relatively low cost and small size compared to nanosecond Nd:YAG optical ...
L. Leggio, S.B. Gawali, D. Gallego, B. Wiśniowski, O. de Varona   +4 more
doaj   +1 more source

Innovative Processing of Compacted Waste Aluminum Alloy Powders via Controlled Remelting and Solidification

Advanced Engineering Materials, EarlyView.
This study demonstrates an efficient recycling route for out‐of‐spec AlSi10Mg atomized powders through compaction and arc remelting followed by suction casting. By correlating compaction load, cooling rate, and resulting microstructure, we show that intermediate pressures (50–80 kN) and rapid cooling refine dendrites, reduce porosity, and enhance ...
Mila Christy de Oliveira, Marcella Gaute Cavalcante Xavier, Abdoul‐Aziz Bogno, Piter Gargarella, José Eduardo Spinelli   +4 more
wiley   +1 more source

Beam Shaping by Mode Superposition With Coefficient Optimization

IEEE Photonics Journal
Beam shaping is of significance for applications in various fields, including laser fusion, laser processing, and optical manipulation. One conventional approach for beam shaping is using the superposition of eigenmodes, such as the Hermite-Gaussian (HG)
Guowen Zhang, Hang Sun, Ziyang Chen, Yanli Zhang, Jixiong Pu, Jianqiang Zhu   +5 more
doaj   +1 more source

Prediction of Surface Topography Parameters in Direct Laser Interference Patterning of Stainless Steel Using Infrared Monitoring and Convolutional Neural Networks

Advanced Engineering Materials, EarlyView.
This study presents an infrared monitoring approach for direct laser interference patterning (DLIP) combined with a convolutional neural network (CNN). Thermal emission data captured during structuring are used to predict surface topography parameters.
Lukas Olawsky, Marcelo Sallese, Leander Kläber, Clemens Kuhn, Keming Du, Andrés Fabián Lasagni   +5 more
wiley   +1 more source

Thermomechanical Fatigue and Creep–Fatigue Interaction of Inconel 718 Additively Manufactured by Laser Beam Powder Bed Fusion

Advanced Engineering Materials, EarlyView.
Thermomechanical fatigue tests of laser beam powder bed fusion (PBF‐LB) Inconel 718 show that the additively manufactured material reaches almost the lifetimes of conventionally‐rolled material under no‐dwell conditions. Introducing dwell times at the maximum temperature markedly reduces the lifetimes due to pronounced grain boundary sliding associated
Stefan Guth, Tomáš Babinský, Jan Lars Riedel, Wen Hao Kan, Aijun Huang, Martin Heilmaier, Ivo Šulák   +6 more
wiley   +1 more source

DMD-based excitation of transverse laser modes by spatial pump beam shaping [PDF]

, 2019
The excitation of transverse laser modes, can be achieved by a cavity-internal amplitude or phase modulation of the laser light. For this purpose typically additional cavity-internal components are applied, which can result in increased losses and a ...
Schepers, Florian, Tim Hellwig, Hellwig, Tim, Fallnich, Carsten, Florian Schepers, Carsten Fallnich, Bexter, Tim, Tim Bexter   +7 more
core   +1 more source

Low‐Angle Grain Boundaries and Re‐Segregation in Single‐Crystalline Ni‐Base Superalloys

Advanced Engineering Materials, EarlyView.
This work demonstrates that Re‐segregation at low‐angle grain boundaries (LAGBs) in Ni‐base superalloys is influenced by misorientation angle. Advanced microscopy and atom probe tomography reveal that higher misorientation angles increases Re‐segregation.
Alireza B. Parsa, Aparna Saksena, Alesander Kostka, Pascal Thome, Felicitas Scholz, Alexandre Mussi, Christoph Somsen, Baptiste Gault, Jan Frenzel, Gunther Eggeler   +9 more
wiley   +1 more source

Productivity‐Driven Optimization of Laser Powder Bed Fusion Parameters for IN718 Superalloy: Process Control, Microstructure, and Mechanical Properties

Advanced Engineering Materials, EarlyView.
This study demonstrates how optimizing laser power, scanning speed, and hatching distance in laser powder bed fusion can boost the productivity of Inconel 718 manufacturing by up to 29% while maintaining mechanical integrity. The work delivers a validated process window and cost–time analysis, offering industry‐ready guidelines for efficient additive ...
Amir Behjat, Guido Barale, John Stavridis, Ehsan Norouzi, Jin‐Yoo Suh, Dong‐Ik Kim, Luca Iuliano, Abdollah Saboori   +7 more
wiley   +1 more source

Minimal-effort planning of active alignment processes for beam-shaping optics

, 2022
Art. 93430WIn science and industry, the alignment of beam-shaping optics is usually a manual procedure. Many industrial applications utilizing beam-shaping optical systems require more scalable production solutions and therefore effort has been invested ...
Losch, Daniel, Brecher, Christian, Haag, Sebastian, Zontar, Daniel, Schlette, Christian, Roßmann, Jürgen, Müller, Tobias, Schranner, Matthias   +7 more
core   +1 more source

Adaptive beam-shaping enabled high-precision patterned laser micro-grooving

International Journal of Extreme Manufacturing
Microgrooves with diverse cross-sections are required in various fields but remain a significant challenge in precision machining, especially for hard-to-machine materials.
Pei Qiu, Jun Li, Dandan Yuan, Zixuan Xin, Jiaxu Huang, Shaolin Xu   +5 more
doaj   +1 more source