Results 61 to 70 of about 1,231,806 (179)
A Fully Lithography‐Free Fabrication Strategy for Organic Electrochemical Transistors
Advanced Materials Technologies, EarlyView.A fully lithography‐free fabrication strategy for organic electrochemical transistors (OECTs) is developed, eliminating the need for photolithography and other cleanroom‐based processes. By combining a laser‐cut polymer mask with a dual‐layer tape process, the proposed strategy enables simple and accessible fabrication, facilitating rapid OECT ...
Miguel H. Boratto +4 more
wiley +1 more source
Polytechnic Journal, 2020 3D evaluation and shear bond strength (SBS) for metal and ceramic brackets after three pre-treatment surfaces of lithium disilicate (LD) crowns. Sixty lithium disilicate (LD) crowns were fabricated in laboratory according to manufacturer ...
Huda A. Mohammed, Omar S. Ali
doaj +1 more source
Toward High‐Resolution Polymeric Neural Interfaces: A Practical Guide for Electron Beam Lithography
Advanced Science, EarlyView.Electron beam lithography (EBL) enables sub‐micron patterning of polymer‐based neural implants, overcoming the resolution limits of optical lithography. By addressing challenges such as charging, non‐planarity, and substrate heating, it supports higher channel density, improved miniaturization, and better long‐term tissue integration.
Hanna Karlsson‐Fernberg, Maria Asplund
wiley +1 more source
International Journal of Photoenergy, 2018 Highly light scattering structures have been generated in a poly(ethylene terephthalate) (PET) film using a CO2 laser. The haze, and in some cases the transparency, of the PET films have been improved by varying the processing parameters of the laser ...
Simon D. Hodgson, Alice R. Gillett
doaj +1 more source
Microfluidic Gratings for X‐Ray Phase Contrast Imaging
Advanced Science, EarlyView.This work establishes a new protocol for the fabrication of X‐ray gratings that exploits the advantages of microfluidics and enables a more inexpensive, faster, and scalable production process. These X‐ray devices are fundamental for implementing X‐ray phase contrast imaging (XPCI) in laboratory and clinical settings, yet their costly and complex ...
Alessandro Rossi +10 more
wiley +1 more source
, 2019 Click on the DOI link to access the article (may not be free).The diffusion length of surface textured tantalum using AVIA 355® nanosecond laser was correlated with the different laser parameters.
Mahmood Al Bashir +3 more
core +1 more source
Scientific Reports, 2023 The purpose of this study is to analyze the damage of antireflective (AR) coating over potassium dihydrogen phosphate (KDP) crystal subjected to multi-pulse laser irradiation at low flux under vacuum.
Teng-Hui You +7 more
doaj +1 more source
Advanced Science, EarlyView.Solvent‐desorption‐induced structural transformation of 5,15‐bisphenyl‐tetrabenzoporphyrin generates a long‐period polymorph, in which the π‐stacking direction rotates by 90° between adjacent layers within the crystal while largely retaining crystallographic integrity.
Kazuya Miyazaki +7 more
wiley +1 more source
A laser-based ice shape profilometer for use in icing wind tunnels [PDF]
, 1995 A laser-based profilometer was developed to measure the thickness and shape of ice accretions on the leading edge of airfoils and other models in icing wind tunnels.
Hovenac, Edward A., Vargas, Mario
core
Pulsed carbon-dioxide laser ablation: profilometric analysis
, 2004 Pulsed carbon-dioxide (TEA CO2) laser, among other, is suitable for ablation of hard ceramic coatings (HCC). HCC, deposited on steel substrate, can be used for tools and machine parts protection.
Panjan, P. +4 more
core +2 more sources