Results 1 to 10 of about 3,328,791 (293)
Evaluating the maximum shear modulus (G0) for different bender-soil coupling loads [PDF]
The current paper aims to test the effects of vertical loads on the maximum shear modulus (G0). The tests were undertaken with unsaturated soils in unconfined conditions.
de Paula Caio de Mattos Azevedo +1 more
doaj +3 more sources
Shear modulus of hydrate bearing calcareous sand-fines mixture [PDF]
This article presents a laboratory study on the maximum shear modulus of a THF hydrate bearing calcareous sand (CS)–fines mixture. The maximum shear modulus was inferred from the shear wave velocity measured from the bender elements installed in a ...
Ji Litong +3 more
doaj +2 more sources
Maximum shear modulus and modulus degradation curves of an unsaturated tropical soil
The maximum shear modulus (G0) and the modulus degradation curve (G/G0 versus γ) are important information in the evaluation of the soil mechanical behavior, both for dynamic and static loads. Dynamic tests (resonant column and cyclic triaxial tests) are not routinely performed in geotechnical practice in Brazil, and the geotechnical literature on the ...
Jeferson Fernandes +2 more
openaire +4 more sources
The shear modulus is an essential parameter that reflects the mechanical properties of the soil. However, little is known about the shear modulus of coral sand, especially under complex consolidation conditions. In this paper, we present the results of a
Weijia Ma, You Qin, Fei Gao, Qi Wu
doaj +3 more sources
The maximum shear modulus of expansive soil during wetting-drying processes and its prediction
In order to examine the dynamic characteristics of expansive soil in natural environment, the maximum shear modulus of undisturbed and remoulded Nanyang expansive soil specimens were tested by using a triaxial apparatus equipping with a pair of bender ...
Wei CHEN, De’an SUN, Junran ZHANG
doaj +2 more sources
Research on Comparison of the Maximum Dynamic Shear Modulus Test
AbstractDynamic soil modulus and damping ratio are the two basic parameters to describe dynamic deformation characteristics of the soil. There are three ways to obtain soil dynamics parameters i.e. field test, laboratory test, and calculating empirical. Silt loam samples were collected from Dongying area in this study.
Chuancheng, Yang +2 more
exaly +2 more sources
Resonant column tests on maximum shear modulus and damping ratio of coral sand
The resonant column tests on the effects of relative density and confining pressure on the maximum modulus and damping ratio of coral sand in South China Sea under small strain are performed.
LI Xiao-mei 1, WANG Fang 1, HAN Lin 2, GUAN Yun-fei 1, ZHAN Xin-jie 1
doaj +3 more sources
Introduction: While shear modulus has been used as an index of muscle elongation, high costs prevent its general adoption. A more general indicator that can quantify muscle elongation non-invasively is needed to develop effective methods for stretching ...
Sayaka Nakao +8 more
doaj +1 more source
Effect of Mean Grain Size on the Small-Strain Dynamic Properties of Calcareous Sand
Calcareous sand was selected as the prior material for island reclamation in many coastal regions. The mechanical properties of the granular materials are greatly affected by their grain size distribution conditions.
Liwei Wen
doaj +1 more source
Maximum shear modulus estimative from SPT for some Brazilian tropical soils
Maximum shear modulus (G0) has been used in various geotechnical jobs (e.g., seismic site assessment, machine vibration and pile driven). Laboratory and in situ determination of G0 is not a current practice in Brazil. G0 can be estimated from empirical correlations based on in situ tests like Standard Penetration Test (SPT) and Cone Penetration Test ...
Breno Rocha +2 more
openaire +4 more sources

