Results 91 to 100 of about 4,267,011 (184)
Holz als Roh- und Werkstoff, 2008 Wettability of wood surface is measured by the contact angle between the liquid and the surface of the wood. In this study, the wettability of MDF surfaces was measured using different mixtures of distilled water and isopropanol. The results reveal that TF-bonded MDF made from fresh and recycled fibers showed better wettability than the corresponding ...
Rolleri, Aldo, Roffael, Edmone
openaire +2 more sources
Effect of the equilibrium moisture on the roughness of medium density fiberboards (mdf)
, 2018 The surface roughness is primarily a function of the raw material properties, but other factors like type and amount of resin, press cycle, sanding and moisture content of the boards may also affect the roughness and other surface properties. In this study the effect of the equilibrium moisture content on medium density fiberboards (MDF) surfaces was ...
Rolleri, Aldo, Roffael, Edmone
openaire +1 more source
The influence of fiber chemical treatment on prevention of biologic deterioration of medium density fiberboard (MDF) [PDF]
, 2014 In this research, the effects of acetylation on the prevention of white-rot and brown-rot fungi deterioration in medium density fiberboard (MDF) were investigated.
seyedeh masoomeh, Reza Hajihassani
core +1 more source
Manufacture of medium density fiberboard (MDF) panels from rhododendron (R. ponticum L.) biomass
Building and Environment, 2008 Abstract Rhododendron has invaded the understory layer of the forests throughout the Black Sea Region of Turkey with substantial biomass potential. This study was conducted to evaluate the suitability of Rhododendron fiber for medium density fiberboard (MDF) production.
Akgül, Mehmet, Çamlıbel, Osman
openaire +2 more sources
MANUFACTURE OF MEDIUM DENSITY FIBERBOARD (MDF) PANELS FROM AGRIBASED LIGNOCELLULOSIC BIOMASS
, 2017 Lignocellulosics fibers and commercially-manufactured-chip (Pinus sylvestris L., Fagus orientalis and Quercus robur L.) with 11% moisture conten twere used for the experiment. The mixingratios of lignocellulosics fibers was 20% which is from okra and tobaccos talks, hazelnut and walnuts hell, and pinecone for each mixture in preformed panel and ...
Ayata, Umit +3 more
openaire +3 more sources
Some Chemical Properties of Luffa and Its Suitability for Medium Density Fiberboard (MDF) Production [PDF]
, 2013 Camlibel, Osman/0000-0002-8766-1316; Korkut, Suleyman/0000-0002-4871-354X; ayata, umit/0000-0002-6787-7822WOS: 000315386400021This study was conducted to evaluate suitability of luffa (Luffa cylindrica) fiber for medium density fiberboard (MDF ...
Çamlıbel, Osman +3 more
core +2 more sources
Strength of high-density wood-based panels reinforced with melamine films
DrewnoWood-based panels are a group of products with a wide range of applications, which are not obtained from solid wood, but are made from its fragments, such as wood chips, sawdust or wood dust, which are usually waste from production. The recycled material,
Adam Lipski, Sebastian Karolewski
doaj +1 more source
Maderas: Ciencia y Tecnología, 2002 Los tableros de densidad media "Medium Density Fiberboard" (MDF), representan un caso de particular relevancia, dentro de los materiales de ingeniería. Sin embargo, en Brasil, aun son pocos los trabajos existentes acerca de las propiedades mecánicas de ...
Mariano Martínez-Espinosa +2 more
doaj
EFFECTS OF TEMPERATURE ON THE BENDING PERFORMANCE OF WOOD-BASED PANELS
BioResources, 2012 The effect of temperature in the range from 25 ºC to 175 ºC on the bending performance of plywood and medium density fiberboard (MDF) has been studied with the ultimate purpose of optimizing the post-processing using radio frequency heating and improving
Jianhui Zhou, +5 more
doaj
Journal of the Mechanical Behavior of MaterialsThe amount of waste produced by industrial processes continues to increase, necessitating its reuse. Medium-density fiberboard (MDF) sawdust is a waste product generated from woodworking.
Fayzulla Bayan Jabbar
doaj +1 more source