Results 111 to 120 of about 54,360 (311)

Magnetic field strength influence on the reactive magnetron sputter deposition of Ta2O5

, 2012
Reactive magnetron sputtering enables the deposition of various thin films to be used for protective as well as optical and electronic applications. However, progressing target erosion during sputtering results in increased magnetic field strengths at ...
Holec, D., Hollerweger, R., Mayrhofer, P. H., Paulitsch, J., Polcik, P., Rachbauer, R.   +5 more
core   +1 more source

Interaction of Ladle Slag With Varying SiO2 Content and Recyclate‐Based MgO–C Refractories

Advanced Engineering Materials, EarlyView.
Ladle slags (CaO/Al2O3 = 1) with 1–20 wt% SiO2 were investigated in contact with industrial MgO–C refractories fabricated from fresh magnesia and 50 wt% recyclate. The sessile drop method at 1600°C reveals intensive gas formation, delayed slag infiltration in recyclate‐based samples, and, under high‐SiO2 slag, formation of a dense MgAl2O4‐rich ...
Anton Yehorov, Eldar Salpagarov, Anhelina Mospan, Till Manon Jannis Stadtmüller, Thomas Schemmel, Christos Georgios Aneziris, Olena Volkova   +6 more
wiley   +1 more source

Investigation on the temperature-dependent diffusion growth of intermetallic compounds in the Mg-Al-Zn system: Experiment and modeling

Journal of Magnesium and Alloys
With the rapid development of Mg alloys, deeper understanding to the thermodynamic and diffusional kinetic behavior of intermetallic compounds (IMCs) is important for studying the effect of alloying elements to the microstructure evolution.
Kaiming Cheng, Yan Zheng, Jiaxing Sun, Yafei Zhao, Jin Wang, Huan Yu, Dongqing Zhao, Hang Li, Jixue Zhou, Zhenyu Ma, Junmin Wang, Cuiping Guo, Xitao Wang, Lijun Zhang, Yong Du   +14 more
doaj   +1 more source

Impact of Sustainable Binders Based on Lignin and Collagen on the Volume Stability and Mechanical Properties of MgO‐C Refractories with MgO‐C Recyclates

Advanced Engineering Materials, EarlyView.
Collagen hydrolysate is evaluated as a sustainable binder for MgO‐C refractories. Its thermally induced cross‐linking and gas release lead to expansion and cracking in large bricks, but tailored batches with lignin, recyclates, or fine graphite improve the gas release while thermal treatment and stability.
Till M. J. Stadtmüller, Florian Kerber, Kirsten Moritz, Steffen Dudczig, Konstantin Kraushaar, Thomas Schemmel, Jana Hubálková, Patrick Gehre, Christos G. Aneziris   +8 more
wiley   +1 more source

Creating Ti–Fe α/β Alloys by Diffusion‐Driven Solid‐State Processing

Advanced Engineering Materials, EarlyView.
This study proposes making alloys containing fast diffusing elements that are difficult to produce by ingot metallurgy, by diffusion‐driven solid‐state HIP processing of elemental powders and low‐temperature homogenisation. Here, novel Fe‐Ti α–β alloys are formed having fine α–β lamellae, a small β prior grain size without significant intermetallics ...
Jiaqi Xu, Xun Zhang, Jack M. Donoghue, Albert D. Smith, Rahul Unnikrishnan, Rhys Thomas, Vahid Nekouie, Jie Luo, Dongchen Hu, Michael Preuss, Philip J. Withers   +10 more
wiley   +1 more source

Characterization of Macro/Microstructure and Corrosion Resistance of Austenitic Gas Tungsten Arc Welding Cladding

Advanced Engineering Materials, EarlyView.
Cladding is a proven method that boosts the surface qualities of mechanical parts by applying a layer of more durable material over a base substrate. This work responds to the needs of offshore and pressure vessels sectors by focusing on cladding a super austenitic steel onto low‐carbon steel through gas tungsten arc welding.
E. J. da Cruz Junior, F. M. F. A. Varasquim, F. O. Carvalho, L. F. F. Santiago, V. A. Ventrella, I. Calliari, M. Pigato   +6 more
wiley   +1 more source

Incorporation of Selenium into Sol–Gel‐Derived Bioactive Glass: Influence on Glass Structure, Bioactivity, and its Selective Cytotoxicity

Advanced Engineering Materials, EarlyView.
Selenium was incorporated into a sol–gel‐derived bioactive glass to enable sustained therapeutic ion release. The selenium‐containing glass preserved bioactivity while selectively inducing cytotoxicity in osteosarcoma cells and maintaining osteoblastic viability.
Breno Rocha Barrioni, Thalita Marcolan Valverde, Talita Martins, Guilherme Mattos Jardim Costa, Alfredo Miranda de Goes, Marcello Rosa Dumont, Eduardo Henrique Martins Nunes, Marivalda de Magalhães Pereira   +7 more
wiley   +1 more source

Numerical Modeling of Tank Cars Carrying Hazardous Materials With and Without Composite Metal Foam

Advanced Engineering Materials, EarlyView.
Large‐scale puncture models consisting of hazardous materials (HAZMATs) tank car with protective steel–steel composite metal foam (S–S CMF) are solved numerically. Tank car plate with added 10.91–13.33 mm thick S–S CMF layer does not puncture. Protective S–S CMF absorbs impact energy, reduces plate deformation, and prevents shear bands formation ...
Aman Kaushik, Afsaneh Rabiei
wiley   +1 more source

**Mastering Metallurgy: The Ultimate Guide to Materials Science and Metal Innovation**

Very Detailed Description This comprehensive guide dives deep into the multifaceted world of **Metallurgy**, providing readers with an all-encompassing resource to master the science and engineering of metals from the ground up. Whether you're a student new to the field or a professional metallurgist aiming to refine your expertise, this guide covers ...
openaire   +1 more source

Stainless steels reinforced with intermetallics useful against corrosion and wear [PDF]

, 2008
Powder Technology Research Group has developed an innovative family of composite materials is presented. Metallic matrix are austenitic and ferritic stainless steels, and as reinforcements, intermetallics, have been used in quantities from 1% to 15% (vol.
Torralba Castelló, José Manuel
core   +1 more source