Results 41 to 50 of about 211,967 (262)
Material characterization of magnesium elektron ZRE1 alloy with Praseodymium (Pr) and Erbium (Er) additions [PDF]
, 2020 The application of magnesium (Mg) is limited due to its poor mechanical and microstructural properties. The additions of rare earth elements to the Mg-Zn-Zr alloys will result in a much better properties of Mg alloy.
Ahmad, Rosli, Mazlan, Nadia Farhana
core +1 more source
Cailiao gongcheng, 2021 The solid solution and precipitations of alloying elements can change the chemical potential of the primary phase and the species of the second phase, which can significantly affect the micro-galvanic corrosion behaviors of magnesium alloys.
JIANG Shi-yu +3 more
doaj +1 more source
Precipitate stability and recrystallisation in the weld nuggets of friction stir welded Al-Mg-Si and Al-Mg-Sc alloys [PDF]
, 2008 Two different precipitate hardening aluminium alloys processed by friction stir welding were investigated. The microstructure and the hardness of the as delivered materials were compared to that of the weld nugget.
A. Cabello Muñoz +31 more
core +5 more sources
Antibacterial biodegradable Mg-Ag alloys
European Cells and Materials, 2013 The use of magnesium alloys as degradable metals for biomedical applications is a topic of ongoing research and the demand for multifunctional materials is increasing. Hence, binary Mg-Ag alloys were designed as implant materials to combine the favourable properties of magnesium with the well-known antibacterial property of silver. In this study, three
Tie, D. +6 more
openaire +4 more sources
Significant hardness enhancement in an Al–Cu–Mg alloy with high Cu:Mg ratio by microalloying with Si and Ge [PDF]
, 2018 The evolution of hardness in an Al-Cu-Mg based alloy with high Cu:Mg ratio (= 2, at. %) microalloyed with Si and Ge was studied during artificial ageing treatment performed at 190 °C. The results were compared to those obtained in a similar alloy with no
Castro Riglos, Maria Victoria +2 more
core +1 more source
The effect of precipitation on strength and ductility in a Mg-Zn-Y alloy
, 2012 The effect of pre-ageing deformation on the size and distribution of beta-prime precipitates and subsequently on the resulting strength and ductility have been measured in a Mg-3.0at.%Zn-0.5at.%Y alloy.
Mukai, Toshiji +3 more
core +1 more source
Effect of nickel on the microstructure and mechanical property of die-cast Al–Mg–Si–Mn alloy [PDF]
, 2014 The effect of nickel on the microstructure and mechanical properties of a die-cast Al–Mg–Si–Mn alloy has been investigated. The results show that the presence of Ni in the alloy promotes the formation of Ni-rich intermetallics.
A Santini +26 more
core +1 more source
Mechanical Properties of Aluminum-Magnesium Alloy Prepared by Slope Plate Casting Process [PDF]
Engineering and Technology Journal, 2015 The present work encompasses the development of microstructure by using cooling plate casting process. This process consists of pouring the molten metal at temperature close to the liquidus line in an inclined cooling plate. The mould and the slope plate
Awfa Abdull-Rasoul, Zainab Kassim Hassan
doaj +1 more source
Effect of Addition Alloying Elements (Nickel and Cadmium) on Mechanical Properties of Al-Zn-Mg Alloy [PDF]
Engineering and Technology Journal, 2014 This work is concerned to study effect of addition the cadmium and nickel on mechanical properties of Al-Zn-Mg alloy. Three alloys were prepared with addition cadmium and nickel (0.5%wt) for each one alloy and added the nickel and cadmium in form ...
Waleed T.Rashid
doaj +1 more source
Journal of Materials Research and Technology, 2023 Traditional recrystallization technology is based on recrystallization annealing after artificial plastic deformation. In the present study, we found that rapid solidification through deep undercooling can induce substantial plastic deformation and ...
Xiaolong Xu +3 more
doaj +1 more source