Results 1 to 10 of about 265 (145)
Modeling PDC cutter rock interaction [PDF]
Proceedings of IADC/SPE Drilling Conference, 2019 Optimizing the drilling performance in high pressure high temperature (HPHT) operations is crucial to successful, economic mineral extraction, and is one of the major goals behind the Department of Energy’s (DOE) “Deep Trek” program and the primary goal of the Ultra-Deep Drilling Simulator (UDS) laboratory currently being designed and constructed at ...
L. Gerbaud, S. Menand, H. Sellami
openaire +3 more sources
Rock Breakage Mechanisms With a PDC Cutter [PDF]
Proceedings of SPE Annual Technical Conference and Exhibition, 1985 ABSTRACT Some aspects of chip generation by a polycrystalline diamond compact (PDC) cutter moving through a rock can be understood by examining the shapes of the chips and the fracture patterns in the remaining rock. Data from laboratory experiments have led to general conclusions about the uniformity of chip generation mechanisms in ...
D. H. Zeuch, J. T. Finger
openaire +1 more source
Research on the method of dynamic PDC cutters distribution
IOP Conference Series: Earth and Environmental Science, 2021 Abstract PDC bit design, especially the design of the crown and cutters of PDC bit, is a relatively complex analysis process, which involves many factors such as the back-dip angle, cutting depth, cutting force, cutting power and other factors of PDC cutters.
Qi Peng +4 more
openaire +1 more source
Известия Томского политехнического университета: Инжиниринг георесурсов, 2022 The relevance. Vibrations of a drill string of any origin, arising while drilling a well, lead to a decrease in the quality of the work performed. The known methods of combating this phenomenon are technically and technologically complicated. When drilling with a PDC-type rock cutting tool, one of the reasons for the occurrence of lateral vibrations of
Vyacheslav V. Neskoromnykh +3 more
openaire +1 more source
Design and Simulation of Bionic Coupling PDC Cutter
Shiyou jixie, 2021 In order to solve the problems of PDC bit such as low working efficiency, easy stratification of diamond and hard alloy and bit balling formed by delayed discharge of rock fragment, the structure of polycrystalline diamond-hard alloy interface and the ...
吴泽兵, 席凯凯, 王杰, 郭禹伦
doaj
Cutting mechanism of a special 3D concave-shaped PDC cutter applicable to the Weiyuan shale
Journal of Petroleum Exploration and Production Technology, 2023 The Weiyuan shale gas field faces problems of long drilling cycles and high development costs. Improving the drilling efficiency of polycrystalline diamond compact bits in shale formations will significantly reduce the overall well cost and duration ...
Xiaohua Ke +5 more
doaj +1 more source
Experimental Study on Conglomerate Breaking Characteristics of Conical PDC Cutter
Shiyou jixie, 2021 In order to further improve the rock breaking efficiency and the adaptability of drilling hard and complex strata of PDC bit, a comprehensive test device of rock breaking by PDC cutter was developed. The test device was used to conduct experimental study
Xu Weiqiang +6 more
doaj
Energies, 2022 The Permian igneous rock in Shunbei Oilfield exhibits high rock strength, which results in a low rate of penetration (ROP) and shortens the cutter’s service life. It is necessary to analyze and evaluate the rock breaking effect of cutters.
Zhuoxin Dong +6 more
doaj +1 more source
Rock Breaking Mechanism and Experimental Study of Axe-shaped PDC Cutter
Shiyou jixie, 2022 Axe-shaped PDC cutter has more obvious rock breaking advantage than conventional PDC cutter. In order to analyze the rock breaking mechanism of the axe-shaped PDC cutter, the finite element simulation and test were used to conduct comparison and force ...
Zou Deyong +3 more
doaj
Shiyou jixieWhen the PDC bit is used to drill conglomerate formations， the frequent impact loads reduce the expected life of PDC cutter， leading to frequent bit changes and ultimately affecting drilling efficiency.
Shi Jiangang +5 more
doaj +3 more sources