Results 91 to 100 of about 12,613 (263)
Chemie Ingenieur Technik, EarlyView.In the ENPRO REUNION project, a manufacturer‐independent modular plant concept was demonstrated by commissioning a pilot plant that integrated modules from different vendors and by expanding the module pool to include extraction and crystallization units.
Laura Marsollek +8 more
wiley +1 more source
Optical Multiphase Conductivity Inline Probe: Characterization and Analysis of Foam Structures
Chemie Ingenieur Technik, EarlyView.A novel inline probe combines optical imaging and electrical conductivity within a shared measurement volume, enabling simultaneous determination of foam structure and composition. The method provides real‐time access to cell size distributions and liquid fractions under process conditions. ABSTRACT For inline process analysis of foams, a novel optical
Marc Hofmann +3 more
wiley +1 more source
Chemie Ingenieur Technik, EarlyView.This study evaluates how small water impurities—typical in ammonia cracking feedstock—affect catalyst performance at elevated pressures and temperatures. By decoupling permanent degradation from reversible inhibition, the findings highlight trace water as a significant factor for reliable catalyst screening and industrial ammonia cracking scale‐up ...
Bruno V. P. Lago +6 more
wiley +1 more source
The Canadian Journal of Chemical Engineering, EarlyView.Abstract Acid catalyzed conversion of durene by isomerization, disproportionation, and transalkylation is of interest to the development of a methanol‐to‐jet process to reduce the amount of durene in the kerosene. It was of interest to determine whether durene conversion could be performed at a temperature lower than 350°C.
Aida G. Velasco Ortiz +2 more
wiley +1 more source
The Canadian Journal of Chemical Engineering, EarlyView.Abstract This study proposes a novel, green, and sustainable method for synthesizing magnetic iron oxides from metallurgical copper slag (CS), leveraging its iron content as a valuable resource. Iron was extracted via acid leaching using edible citric acid (ECA), forming a citrate–iron complex (CSL), which was subsequently thermally decomposed at 300°C
Melisa Portilla‐Sangabriel +4 more
wiley +1 more source
Clathrate hydrate crystallization
The Canadian Journal of Chemical Engineering, EarlyView.Abstract Clathrate hydrate crystallization has been an area of interest to chemical engineers from the point of view of crystal structure, thermophysical properties, phase equilibria, kinetics, industrial applications, and environmental (climate change) implications.
Peter Englezos
wiley +1 more source
The Canadian Journal of Chemical Engineering, EarlyView.Monitoring gas–liquid dynamics using Electrical resistance tomography for process intensification in stirred tanks Abstract Electrical resistance tomography (ERT) is a non‐invasive technique widely applied to the study of multiphase flows, where phases exhibit different electrical properties.
Federico Alberini +2 more
wiley +1 more source
Hydrogen donor‐assisted visbreaking of Canadian oil sands bitumen
The Canadian Journal of Chemical Engineering, EarlyView.Abstract High‐viscosity Canadian oil sands bitumen requires processing for efficient transportation and refining. Partial upgrading technologies, primarily based on thermal processing, can effectively reduce, or even eliminate, the use of costly diluent, increase bitumen quality and market value, potentially decrease greenhouse gas (GHG) emissions, and
Yi Zhang, Mohamed Ali, Jinwen Chen
wiley +1 more source
Experimental methods in chemical engineering: Magnetometry
The Canadian Journal of Chemical Engineering, EarlyView.Abstract Magnetometry is a non‐invasive technique to characterize the behaviour of magnetic materials of which the most common contain Fe, Co, and Ni. Vibrating sample magnetometers (VSMs) vibrate samples at a fixed frequency in a static, homogeneous magnetic field to induce a voltage in pick up coils according to Faraday's law of induction.
Michael Claeys +3 more
wiley +1 more source
Catalytic Hydrothermal Liquefaction of Polyethylene With Pt/C to Tune Product Selectivity
CleanMat, EarlyView.Pt/C‐catalyzed hydrothermal liquefaction of polyethylene in supercritical water enables time‐dependent control of product selectivity, producing paraffin‐rich oils at shorter reaction times and aromatic‐enriched products at longer times without external hydrogen. ABSTRACT Hydrothermal liquefaction (HTL) represents a promising thermochemical pathway for
Taofeng Lu, Wan‐Ting Chen
wiley +1 more source