Results 51 to 60 of about 7,126 (264)

Creating Ti–Fe α/β Alloys by Diffusion‐Driven Solid‐State Processing

Advanced Engineering Materials, EarlyView.
This study proposes making alloys containing fast diffusing elements that are difficult to produce by ingot metallurgy, by diffusion‐driven solid‐state HIP processing of elemental powders and low‐temperature homogenisation. Here, novel Fe‐Ti α–β alloys are formed having fine α–β lamellae, a small β prior grain size without significant intermetallics ...
Jiaqi Xu, Xun Zhang, Jack M. Donoghue, Albert D. Smith, Rahul Unnikrishnan, Rhys Thomas, Vahid Nekouie, Jie Luo, Dongchen Hu, Michael Preuss, Philip J. Withers   +10 more
wiley   +1 more source

RESEARCH ON REFLECTION CRACKING CHARACTERISTICS OF WARM-MIX RECYCLED ASPHALT MORTAR UNDER THE EFFECT OF FREEZE-THAW CYCLES

Materiali in Tehnologije
The reflection cracking behavior of warm-mix recycled asphalt mortar (WRAM) under freeze-thaw cycles was investigated using a combination of the overlay test and digital image correlation (DIC) technology.
Jian Gao, Zhiqiang Liu, Chao Li, Lan Wang, Yudong Ma   +4 more
doaj   +1 more source

Phase Field Failure Modeling: Brittle‐Ductile Dual‐Phase Microstructures under Compressive Loading

Advanced Engineering Materials, EarlyView.
The approach by Amor and the approach by Miehe and Zhang for asymmetric damage behavior in the phase field method for fracture are compared regarding their fitness for microcrack‐based failure modeling. The comparison is performed for the case of a dual‐phase microstructure with a brittle and a ductile constituent.
Jakob Huber, Jan Torgersen, Ewald Werner
wiley   +1 more source

Imaging of vertical surface-breaking cracks in concrete members using ultrasonic shear wave tomography

Scientific Reports, 2023
Surface-breaking cracks in concrete pose a significant threat to the durability of built structures. They create pathways for an accelerated moisture intrusion, and the transport of environmental and chemical agents such as chloride ions, which in turn ...
Sai Teja Kuchipudi, Sergey Pudovikov, Herbert Wiggenhauser, Debdutta Ghosh, Ute Rabe   +4 more
doaj   +1 more source

Karl Popper and the Mechanisms of Hydrogen Embrittlement

Advanced Engineering Materials, EarlyView.
Representation of the beginning of loss of ductility rather than embrittlement. Small concentrations of hydrogen in a diffusible form within iron are well‐established to harm the mechanical integrity of steels. There are theories that attempt to explain the pernicious role of hydrogen.
H. K. D. H. Bhadeshia
wiley   +1 more source

Creep Properties and Deformation Mechanism of Additively Manufactured NiAl‐CrMo Composites

Advanced Engineering Materials, EarlyView.
Additively manufactured NiAl‐CrMo composites contain numerous interfaces and cell boundaries that control their creep response. At 700°C under high applied stress, creep is dominated by dislocation‐controlled power‐law mechanisms. At 800°C–900°C and lower stresses, creep is primarily diffusion‐controlled along cell boundaries.
Jan Vollhüter, Andreas Bezold, Johan Westraadt, Katharina Fiegl, Subham Chattoraj, Benjamin Wahlmann, Carolin Körner, Michael Mills, Mathias Göken, Steffen Neumeier   +9 more
wiley   +1 more source

Current Status and Challenges in Data Collection for Aerospace Coatings Deposited by Plasma Spraying

Advanced Engineering Materials, EarlyView.
An innovative approach has been integrated into the GRENAT project to optimize plasma spraying and coating performance. Raw materials are accelerated and melted in the plasma generated by torches, creating coatings. Monitoring sensors collect process data which are combined with ex situ characterization data.
Lila Randriamananjara, Vincent Rat, Quentin Dubreuil, Patrice Valorge, Simon Goutier, Alain Denoirjean, Olivier Messe, Céline Ruelle, Jean‐Philippe Poli   +8 more
wiley   +1 more source

Effect of Aggregate Gradation on Reducing Reflection Crack

Journal of Engineering and Sustainable Development, 2010
e rehabilitation of cracked flexible pavement roads by overlaying, without any improvement, is rarely a durable solution, as the cracks rapidly propagate through the new asphalt layer.
Qais S. Kareem
doaj  

In Situ Micromechanical Study of Bimodal γ′–γ″ Precipitate Assemblies in Ni–Cr–Al–Nb Superalloy

Advanced Engineering Materials, EarlyView.
A Ni–Cr–Al–Nb superalloy with a bimodal γ′–γ″ precipitate distribution is developed. Composite precipitate assemblies form through heterogeneous nucleation, effectively impeding dislocation motion. Micropillar compression reveals high strength at room and elevated temperatures, governed by precipitate shearing, with coupled faulting mechanisms ...
Ujjval Bansal, Tae‐Hyeok Kang, Pyuck‐Pa Choi, Subin Lee, Christoph Kirchlechner   +4 more
wiley   +1 more source

Enhancing crack detection in railway tracks through AI-optimized ultrasonic guided wave modes

Biomimetic Intelligence and Robotics
The utilization of ultrasonic guided wave technology for detecting cracks in railway tracks involves analyzing echo signals produced by the interaction of cracks with guided wave modes to achieve precise crack localization, which is extremely important ...
Jianjun Liu, Huan Luo, Han Hu, Jian Li
doaj   +1 more source