Results 131 to 140 of about 1,606 (256)

Effect of quenching temperature on the austenite stability and mechanical properties of high-strength air-cooled TRIP steel prepared with hot-rolled C–Si–Mn sheets

Journal of Materials Research and Technology
This paper systematically studies the effect of quenching temperature on the microstructure evolution and the relationship between the microstructure and mechanical properties of air-cooled TRIP steel prepared with C–Si–Mn hot-rolled sheet.
Deming Xu, Dingkun Zhang, Gengwei Yang, Qiang Wang, Siqian Bao, Gang Zhao   +5 more
doaj   +1 more source

Toward the Application of Multiaxial Failure Criteria: Mean Stress Sensitivity of Carbide‐Rich, High‐Alloy PM‐HIP Tool Steels Under Axial and Torsional Cyclic Loading

steel research international, EarlyView.
This study quantifies axial and torsional long‐life fatigue (LLF) behavior of three carbide‐rich PM‐HIP tool steels, correlating LLF strength with intrinsic defect size and cleanliness, thereby extracting material‐specific mean stress sensitivities and Haigh diagrams.
Lennart Mirko Scholl, Frederik Tegeder, Tobias Hajeck, Alexander Bezold, Christoph Broeckmann   +4 more
wiley   +1 more source

The Effect of Retained Austenite Stability on Mechanical Properties of TRIP Sheet Steels [PDF]

, 2007
Dynamic mechanical properties of TRIP steels with the same volume fraction but different stabilities of retained austenite were evaluated over a wide range of strain rates using a high-velocity hydraulic tensile testing machine.
손동민
core  

Quantification of δ-ferrite and austenite retention in laser-deposited martensitic stainless steel

Journal of Materials Research and Technology
Type 420 martensitic stainless-steel powder was clad onto a CF3M austenitic stainless steel substrate using laser direct-energy-deposition (L-DED).
Zhe Lyu, Thomas J. Lienert, Leijun Li
doaj   +1 more source

Creep Performance of Stainless Steel 316 Brackets: Insights From Conventional and Advanced Modeling Approaches

steel research international, EarlyView.
Creep behavior of SS 316 brackets is examined through experiments, conventional creep laws, and advanced constitutive modeling. Long‐term deformation, stress redistribution, and life prediction are compared under service‐relevant loads. The study highlights the limits of classical models and demonstrates improved accuracy using advanced approaches for ...
Mohsin Sattar, Jan Hosek, Maaz Akhtar, Uliana Finaeva, Muhammad Muzamil, Naser A. Alsaleh, Asad A. Zaidi, Barun Haldar   +7 more
wiley   +1 more source

Microstructure and mechanical property regulation of hot-rolled Al-contained medium-Mn steel by double intercritical annealing

Cailiao gongcheng
Usually，the initial microstructure of hot-rolled and quenched medium-manganese experimental steel is composed of lath martensite matrix and a small amount of tiny granular austenite， also existing apparent Mn-segregation bands. Using double intercritical
MAO Peining, HUANG Xingmin, LYU Chao, LIU Junjie, ZHANG Juan   +4 more
doaj   +1 more source

In Situ Investigation of Microstructure Evolution and Stress Generation During Low‐Pressure Carburizing and Quenching by Means of Synchrotron X‐Ray Diffraction

steel research international, EarlyView.
This study uses in situ synchrotron X‐ray diffraction at the German Electron Synchrotron to analyze low‐pressure carburizing (LPC) in steels. The findings reveal surface carbon saturation and carbide formation kinetics, and phase‐specific stress development during quenching. The results show carbide kinetics depend on steel grade and size, while stress
Ogün Baris Tapar, Michael Georg Zürn, Jens Gibmeier, Antonio Carlos de Figueiredo Silveira, Matthias Steinbacher, Norbert Schell, Jérémy Epp   +6 more
wiley   +1 more source

Microstructure Characterization of Bending Effects in 304L Stainless Steel Cladded with Low‐Alloy Steel Weld

steel research international, EarlyView.
Prebending of 304L/Q345R cladded plates significantly alters the subsequent weld thermal cycle and modifies the local interfacial microstructure. Combined electron backscatter diffraction (EBSD) and microscopy analysis demonstrates that deformation twinning, martensitic transformation, and defect initiation are concentrated at the trimaterial junction,
Ali Fahem, Elsiddig Elmukashfi, Hong Dong   +2 more
wiley   +1 more source

Effect of Double Annealing on the Microstructure and Mechanical Properties of a Medium Manganese Steel

steel research international, EarlyView.
A double intercritical annealing strategy is proposed to tailor the multiphase microstructure and mechanical response of a medium‐Mn steel. The treatment produces an ultrafine mixture of ferrite, martensite and multiple austenite populations with graded thermal and mechanical stability, formed through austenite reversion and controlled retransformation.
Mattia Franceschi, Jose A. Jimenez, Carlos Garcia‐Mateo, Radhakanta Rana   +3 more
wiley   +1 more source

Influence of Tramp Elements on Phase Transformations, Structure, and Properties of Scrap‐Based Steels: A Focused Review of Recent Developments

steel research international, EarlyView.
This review explains how impurities from recycled scrap affect steel production and performance. Even small amounts (far below 1%) of these impurities can change how steel behaves during fabrication but also affect the properties of the end product. With better understanding and targeted countermeasures, these challenges can be managed, enabling wider ...
Oleksandr Glushko, Ronald Schnitzer
wiley   +1 more source