Results 1 to 10 of about 21,983 (192)
Foam generation in a rotor—stator mixer = Schaumerzeugung in einem rotor—stator mischer [PDF]
Chemical engineering and processing : process intensification, 1988 The foaming process of an aqueous liquid system with surface active agents and thickeners in a rotor-stator mixer has been studied.\ud \ud The foaming capacity of a rotor—stator mixer may be represented by a so-called mixing characteristic.
Bertlein, E. +2 more
core +3 more sources
Micromixing in a Rotor-Stator Spinning Disc Reactor. [PDF]
Ind Eng Chem Res, 2017 This paper presents the micromixing times in a rotor-stator spinning disc reactor. Segregation indices are obtained at different rotational speeds performing the Villermaux-Dushman parallel-competitive reaction scheme. Consequently, the corresponding micromixing times are calculated using the engulfment model, while considering the self-engulfment ...
Manzano Martínez AN +3 more
europepmc +5 more sources
Thermal modeling of a mini rotor-stator system [PDF]
Volume 9: Heat Transfer, Fluid Flows, and Thermal Systems, Parts A, B and C, 2009 In this study the temperature increase and heat dissipation in the air gap of a cylindrical mini rotor stator system has been analyzed. A simple thermal model based on lumped parameter thermal networks has been developed.
Aarts, Ronald +4 more
core +4 more sources
Journal of Marine Science and Engineering, 2022 In this article, the influence of rotor–stator distance on the pump performance and rotor–stator interaction strength within mixed-flow centrifugal pump was investigated based on numerical calculation and test verification.
Feng Han +3 more
doaj +1 more source
Actuators, 2022 In this paper, a new superconducting flywheel energy storage system is proposed, whose concept is different from other systems. The superconducting flywheel energy storage system is composed of a radial-type superconducting magnetic bearing (SMB), an ...
Mochimitsu Komori +2 more
doaj +1 more source
Advances in Electrical and Computer Engineering, 2021 Double-stator switched reluctance motors (DSSRMs) possesses high torque/power density. However, these machines have high torque ripples in the commutation region because the outgoing and incoming phase torques reduce significantly in this region ...
Das GUPTA, T., CHAUDHARY, K.
doaj +1 more source
International Journal of Turbomachinery, Propulsion and Power, 2021 In stator–rotor interaction studies on axial turbines, the attention is commonly focused on the unsteady rotor aerodynamics resulting from the periodic perturbations induced by the stator flow structures.
Paolo Gaetani, Giacomo Persico
doaj +1 more source
Chemical Engineering Transactions, 2011 Abstract preview not available - see full-text PDF article.
Thomas Rodgers +4 more
openaire +4 more sources
Numerical Studies of Batch and Inline High Shear Melt Conditioning Technology Using Different Rotors
Crystals, 2022 When casting aluminum alloy billets, high shear melt conditioning (HSMC) technology refines the resulting grain size, reduces the number of defects, and improves mechanical properties without the need to add polluting and expensive chemical grain ...
Gerard Serge Bruno Lebon +2 more
doaj +1 more source
Foam Generation in Rotor‐Stator Mixers [PDF]
Journal of the Society of Dyers and Colourists, 1986 One of the unit operations in foam technology is foam generation in a liquid/gas mixer. The foaming process of an aqueous liquid system with a surface‐active agent in a rotor‐stator mixer has been studied, and it was found that it could be represented by a mixing characteristic relating the liquid flow rate to the maximum gas flow rate needed to ...
Kroezen, A.B.J., Groot Wassink, J.
openaire +2 more sources