Results 11 to 20 of about 521,208 (302)
EXPERIMENTAL STUDY ON SHEAR PERFORMANCE OF SHEAR-RING CONNECTOR
Journal of Structural and Construction Engineering (Transactions of AIJ), 2008 A composite member that thin steel plate was sandwiched between two cedar-glulam-timbers using shear-ring connectors and bolts was developed and equations for estimating the strength and buckling mode of the member were proposed. In this paper, shear test results of shear-ring connector are reported because the shear stiffness of the shear-ring ...
Hiroyasu SAKATA +4 more
openaire +2 more sources
Shear resistance of rubber-ballast composites in simulated water and acid soaked conditions [PDF]
, 2016 Ballast is one of the main structures for the railway tracks. It can resist the lateral movement under dynamic loading transferred by the passing trains with repeatedly.
Chan, Chee Ming, SM Johan, Siti Farhanah
core +4 more sources
International Journal of Concrete Structures and Materials, 2019 The purpose of this study is to investigate and evaluate the feasibility of using high-performance fiber-reinforced cement composites (HPFRCC) to satisfy the requirement of transverse reinforcement in beam-column joint under seismic loads.
Mohammad Hossein Saghafi +2 more
doaj +1 more source
Structural Performance of Shear Connectors
, 2023 The top flange of steel composite bridge girders are furnished with a shear connector, which is a steel projection that facilitates the necessary shear transfer between the steel girder and concrete slab to permit composite action. Shear connectors are essential for building solid connection points that withstand shear loading. The shear connectors are
Thomson, Felix, Jikhil Joseph
openaire +1 more source
Membranes, 2022 In this study, we aimed to provide systematic and critical research to investigate the shear performance and reveal the corresponding structural response and fracture characteristics of the monolayer GK membrane. The results demonstrate that the kirigami
Yuan Gao +4 more
doaj +1 more source
Study on shear performance of cold-formed thin-walled steel-paper straw board composite wall with openings [PDF]
Archives of Civil Engineering, 2023 To explore the application of cold-formed thin-walled steel-paper straw board(CTSPSB) composite wall in practical engineering and further meet people’s living requirements, it was proposed to open holes in the composite wall to simulate the doors and ...
Xiuhua Zhang, Shuijing Xu, Siyu Li
doaj +1 more source
Performance of internal Covariance Estimators for Cosmic Shear Correlation Functions [PDF]
, 2015 Data re-sampling methods such as the delete-one jackknife are a common tool for estimating the covariance of large scale structure probes. In this paper we investigate the concepts of internal covariance estimation in the context of cosmic shear two ...
Eifler, T. F. +3 more
core +2 more sources
Shanghai Jiaotong Daxue xuebao, 2021 This paper conducted a three-point loading experiment and analytical investigations on the shear performance of reinforced concrete (RC) beams with anchor defect at the lower end of stirrups.
ZHAO Pengfei, XUE Xin, YANG Cheng
doaj +1 more source
Buildings, 2023 A double-sided thin steel plate shear wall filled with rigid polyurethane foam (SWR) is proposed. A quasi-static monotonic loading test and quasi-static cycling loading test on shear behavior and the energy dissipation capacity of the SWR were carried ...
Renjie Liu +4 more
doaj +1 more source
Intrinsic alignment boosting: Direct measurement of intrinsic alignments in cosmic shear data [PDF]
, 2010 Intrinsic alignments constitute the major astrophysical systematic for cosmological weak lensing surveys. We present a purely geometrical method with which one can study gravitational shear-intrinsic ellipticity correlations directly in weak lensing data.
Amara +46 more
core +1 more source