Results 61 to 70 of about 843 (168)

Electrochemical Performance of SiC Composite Anode in Aluminum-Air Battery

Electrochemistry, 2020
The commercial pure aluminum (1A95) and its micro-alloyed with Mg and further particle composited with SiC were prepared using the vortex casting method, their electrochemical performances as the anodes in Aluminum-air batteries were investigated using ...
Mingcheng BING, Fan MO, Zhengfei HU
doaj   +1 more source

Investigation of the thermal conductivity of SiC/SiC cladding before and after irradiation

, 2017
Silicon carbide based composites are candidates for structural components and fuel claddings in nuclear power plants. In the frame of accident tolerant fuel research, the effective through-thickness thermal conductivity of SiC/SiC prototype claddings is investigated. This property, which is both material and geometry dependent, has been measured with a
openaire   +1 more source

Effect of grinding-induced residual stress on the mechanical properties of SiCf/SiC composite cladding

Nuclear Engineering and Technology
Centerless grinding was employed to machine the surface of SiCf/SiC composite cladding. The morphology of the ground coating was examined by scanning electron microscopy, and the residual stress was measured via micro-Raman spectroscopy.
Zhennan Xu, Xiaoyu Ma, Jiaxiang Xue, Zhengmao Yang, Zhaoke Chen, Liqiang Zhang, Xiang Xiong   +6 more
doaj   +1 more source

Effect of C4+ Irradiation on Mechanical Property of Polycrystalline HIP-SiC at Room Temperature

Yuanzineng kexue jishu, 2022
Different from other preparation processes, hot isostatic pressing (HIP) has the advantages of improving material density, inhibiting grain growth and avoiding grain orientation, and is often used to prepare polycrystalline 6HSiC materials.
YI Baiquan;LIU Xudong;HAO Zulong
doaj  

Application of SiC/SiC Cladding Tube for Nuclear Systems

Proceedings of Annual / Fall Meetings of Atomic Energy Society of Japan, 2012
Nakazato, Naofumi, Kohyama, Akira, Kohno, Yutaka, Kishimoto, Hirotatsu, Hayasaka, Daisuke, Asakura, Yuuki   +5 more
  +4 more sources

Improved damage tolerance of SiC-based nuclear fuel cladding with novel multi-layered SiC coating design at 1200 °C

Materials & Design
Continuous SiC fibre reinforced SiC matrix composites (SiCf-SiCm) with monolithic SiC outer coatings are considered as a damage-tolerant cladding design for loss of coolant accident (LOCA) conditions in light water reactors.
Guanjie Yuan, David H. Cook, Harold Barnard, Edward Lahoda, Peng Xu, Robert O. Ritchie, Dong Liu   +6 more
doaj   +1 more source

Electroplating chromium on CVD SiC and SiCf-SiC advanced cladding via PyC compatibility coating

Journal of Nuclear Materials, 2018
Abstract Electroplating Cr on SiC using a pyrolytic carbon (PyC) bond coat is demonstrated as an innovative concept for coating of advanced fuel cladding. The quantification of coating stress, SEM morphology, XRD phase analysis, and debonding test of the coating on CVD SiC and SiCf-SiC is shown.
Caen Ang, Craig Kemery, Yutai Katoh
openaire   +2 more sources

Glass–ceramic joining of duplex SiCf/SiC cladding tubes by localized rapid heating and its interfacial hydrothermal corrosion behavior

Journal of Advanced Ceramics
SiCf/SiC cladding tubes were joined to end plugs using Y2O3–Al2O3–SiO2 (YAS) glass filler through localized rapid induction heating at 1400–1500 °C. The joint fabricated at 1450 °C exhibited a dense and uniform glass–ceramic interlayer with the highest ...
Chuang-Tian Zhan, Kun-Heng Huang, Jia-Pei Chen, Qu Ai, Yu Tian, Li-Xiang Wu, Yun Li, Wei-Ming Guo, Yang Liu, Rong-Kun Yang, Jia-Xiang Xue, Hua-Tay Lin   +11 more
doaj   +1 more source

OperaHPC & SCORPION: accelerated optimization of advanced fuels for Gen-II/III reactors via the synergy of high-performance computing with multiscale material engineering

EPJ Nuclear Sciences & Technologies
The licensing of advanced fuel materials and designs for Gen-II/III reactors requires an extension of the qualification of industrial fuel performance codes to meet the requirements of nuclear safety authorities vis-à-vis the verification, validation ...
Michel Bruno, Lambrinou Konstantina
doaj   +1 more source

SiC/SiC Cladding Materials Properties Handbook [PDF]

, 2017
Mary Snead, Yutai Katoh, Takaaki Koyanagi, Gyanender Singh   +3 more
openaire   +1 more source