Results 31 to 40 of about 753 (248)

Resistance Rapid Heating of Aluminum Coatings in an Extreme High Vacuum–Adequate Atmosphere for Hot Stamping

Advanced Engineering Materials, EarlyView.
The subject of this work is the development of a corrosion‐protective coating on steel sheets for form hardening. Rapid heating in an extreme high vacuum (XHV)‐adequate atmosphere is a useful method to prevent oxidation during alloying of 22MnB5 and aluminum to obtain a metallurgical bonding.
Lorenz Albracht, Alexander Schnettger, Ulrich Holländer, Sven Hübner, Bernd‐Arno Behrens, Hans Jürgen Maier   +5 more
wiley   +1 more source

Solid‐State Diffusion and Intermetallic Phase Formation in Roll‐Bonded Mg–Zn Composites With Kirigami‐Patterned Inlay

Advanced Engineering Materials, EarlyView.
Mg–Zn composites with a thickness of 0.21 mm were fabricated using roll bonding of a kirigami‐patterned Mg alloy inlay within a Zn matrix. Thermal activation following this process led to the formation of tailored intermetallic structures, which provided the composite with enhanced flexural strength.
Yaroslav Frolov, Oleksandr Bobukh, Christian Klose, Florian Nürnberger, Hans Jürgen Maier   +4 more
wiley   +1 more source

Liquid-Flooded Compression and Expansion in Scroll Machines – Part I: Model Development

, 2012
A detailed mechanistic model has been developed for scroll compressors and scroll expanders with liquid flooding for application to the Liquid Flooded Ericsson Cycle.
Groll, Eckhard, King, Galen, Horton, Travis, Braun, James, Bell, Ian, Horton, W. Travis, Braun, James E, Lemort, Vincent   +7 more
core   +1 more source

Rafting of Ni‐Based Superalloys Under Multiaxial Load as Understood by Phase‐Field Simulations and Critical Experiments

Advanced Engineering Materials, EarlyView.
Phase‐field simulations coupled with dislocation‐density‐based crystal plasticity modeling reproduce γ′ rafting behavior in single‐crystal Ni‐based superalloys under varied loading conditions. The model captures both macroscopic creep and microscopic morphology evolution, with results matching high‐temperature creep experiments.
Micheal Younan, David Bürger, Gunther Eggeler, Oleg Shchyglo, Ingo Steinbach, Muhammad Adil Ali   +5 more
wiley   +1 more source

Karl Popper and the Mechanisms of Hydrogen Embrittlement

Advanced Engineering Materials, EarlyView.
Representation of the beginning of loss of ductility rather than embrittlement. Small concentrations of hydrogen in a diffusible form within iron are well‐established to harm the mechanical integrity of steels. There are theories that attempt to explain the pernicious role of hydrogen.
H. K. D. H. Bhadeshia
wiley   +1 more source

Direct Metal Deposition of Graphene–Ti28Nb35.4Zr Matrix Composites With Enhanced Mechanical, Corrosion, and Biocompatibility Properties for Bone Implants

Advanced Engineering Materials, EarlyView.
Graphene nanoplatelet (0.1 wt.%) reinforcement significantly enhances the performance of β Ti‐28Nb‐35.4Zr alloy. Grain refinement, reduced water contact angle, and improved surface characteristics promote osteoblast adhesion and complete surface coverage after 7 days.
Khurram Munir, Jixing Lin, Yuncang Li, Li Zhu, Paul F. A. Wright, Cuie Wen   +5 more
wiley   +1 more source

Resonance Analysis of Single Screw Expander Based on Compressed Air Energy Storage System

Journal of Physics: Conference Series, 2023
Abstract As an important technology to achieve energy restructuring, electricity storage plays an important role in the mission of carbon neutrality in today’s society. Compressed air energy storage is one of the most promising technologies for medium- and small-scale power storage. Single screw expander as an important energy conversion
Xiaofeng Song, Yuting Wu, Ruiping Zhi, Lili Shen, Wei Wang, Biao Lei   +5 more
openaire   +1 more source

Enhancing Bubble Removal in Geometry‐Optimized Electrodes

Advanced Engineering Materials, EarlyView.
3D‐printed lattice electrodes outperform stochastic foams in alkaline water electrolysis despite 20%–25% lower surface area. Straight flow channels generate Venturi‐like bubble entrainment, suppressing gas accumulation that renders foam interiors electrochemically inactive.
Florian Wiesner, Peter Förster, Alexander Limper, Anselm Brodersen, Matthias Wessling, John Linkhorst   +5 more
wiley   +1 more source

An investigation of a hypocycloid mechanism based twin-rotor piston engine

, 2014
A unique mechanism is investigated in this paper to show the working principles of a novel hypocycloid twin-rotor piston engine (HTRPE), which provides the basis for the structural design, kinematic and dynamical analysis necessary to realize the engine.
Gu, Fengshou, Xu, Xiaojun, Xu, Haijun, Talbot, Chris, Talbot, Chris J., Xu, X., Xu, H., Deng, Hao, Deng, H.   +8 more
core   +1 more source

Modification of Kalina cycle system 34g by replacing throttle valve with single-screw expander

Thermal Science, 2022
Recovery of the energy loss caused by throttling plays an important role in improving the performance of a cycle. Based on the original Kalina cycle system 34g, two redesigned cycles, which have different placement of single-screw expanders used to replace the throttle valve, are proposed in this paper.
Xinxin Zhang, Zhenlei Li
openaire   +2 more sources