Results 131 to 140 of about 30,399 (295)
Hydrochar‐mill‐scale briquettes with varying C/O molar ratios (0.07–0.90) have been tested at 1650 °C to evaluate their slag foaming performance for electric arc furnace application. All seven briquette recipes developed succeed in promoting slag foaming.
Yu‐Chiao Lu +3 more
wiley +1 more source
H2 prereduction selectively metallizes Fe in UG2 chromite pellets at 1100°C, while silicon carbide becomes active at 1300°C to convert remaining Cr2O3 to carbides and promote Cr metallization. By separating the roles of H2 and SiC, the sequential route reaches up to 65.7% Cr metallization and suppresses in‐furnace CO generation by ≈75% versus ...
D. Coertzen +5 more
wiley +1 more source
This study investigates how slag interacts with magnesia–carbon (MgO–C) refractories under conditions relevant to hydrogen plasma smelting reduction. High‐temperature refractory wear tests are combined with thermodynamic modeling to examine refractory dissolution into slag and slag infiltration into the refractory.
Eeli‐Matti Sassi +4 more
wiley +1 more source
The influence of the ionic reactions on the refining secondary raw materials
The article presents the concept of refining with the use of slag activated with carbide coating. It pointed out the important role of stimulators of ionic reactions.
P. Schlafka +3 more
doaj
The recycling of lithium‐ion batteries (LIBs) through extractive pyrometallurgy is widely used, but a significant drawback is the loss of lithium to the slag.
Peter Cornelius Gantz +7 more
doaj +1 more source
Characterization of Nonmetallic Inclusions in Ce‐Containing Steels at the Submicroscopic Level
Accurate detection of nonmetallic inclusions (NMIs) is crucial for ensuring high standards in steel cleanness and properties. Optimized automated SEM/EDS measurements are required for evaluating Ce‐containing NMIs. This study enhances the characterization of submicroscopic NMI in Ce‐alloyed ultralow‐carbon, high‐manganese, and electrical steels ...
Kathrin Thiele, Robert Musi
wiley +1 more source
Commercial iron ore sinter is reduced isothermally under operation‐derived radial blast furnace gas atmospheres with and without 20 kg H2/tHM injection. Hydrogen improves reduction at 900–1100 °C, whereas at 700 °C the high H2O content limits the wüstite‐to‐iron driving force.
Ahmed Abdelrahim +5 more
wiley +1 more source
Prospects of Eliminating Fluorspar Consumption in a Sustainable Argon‐Oxygen‐Decarburization Process
This study aims at identifying pathways for eliminating fluorspar consumption in the argon‐oxygen‐decarburization (AOD) process. Thermodynamic calculations suggest the feasibility of completely replacing fluorspar with alternative fluxes such as Al2O3, Na2O, K2O, and Li2O of suitable amounts.
Yu‐Chiao Lu +3 more
wiley +1 more source
Biocarbon injection is investigated as a promising pathway for sustainable electric arc furnace steelmaking using a combined experimental–numerical approach. Results demonstrate that biocarbon can effectively penetrate slag and generate intense foaming within a defined operating window.
Christopher DiGiovanni +6 more
wiley +1 more source
In primary electric arc furnace (EAF) steelmaking, carbon boiling removes nitrogen from liquid steel and sustains slag foaming. In 100% scrap‐ or hydrogen direct reduced iron (HDRI)‐based EAF steelmaking, carbon boiling is absent; therefore, carbonaceous material and oxygen injection into the slag is needed to maintain foaming and avoid nitrogen ...
Zushu Li +3 more
wiley +1 more source

