Results 41 to 50 of about 9,407,119 (293)
Advanced Engineering Materials, EarlyView.Mg–Zn composites with a thickness of 0.21 mm were fabricated using roll bonding of a kirigami‐patterned Mg alloy inlay within a Zn matrix. Thermal activation following this process led to the formation of tailored intermetallic structures, which provided the composite with enhanced flexural strength.
Yaroslav Frolov +4 more
wiley +1 more source
Inverse Methods on Small Punch Tests
, 2011 The characterization of the mechanical behaviour of structural materials, with the exception of material hardness, is a destructive procedure which requires direct extraction of test specimens from the component to analyse. Because this component needs to be operative, these specimens have to be as small as possible, in order not to affect the ...
Penuelas, Ines +3 more
openaire +2 more sources
Influence of Test Temperature and Test Frequency on Fatigue Life of Aluminum Alloy EN AW‐2618A
Advanced Engineering Materials, EarlyView.The influence of test temperature and test frequency on the fatigue life of EN AW‐2618A is investigated. High‐cycle fatigue tests are performed at different test temperatures and frequencies on the 1000 h/230°C overaged state. Both test parameters reduce fatigue life due to time‐dependent damage mechanisms.
Ying Han +5 more
wiley +1 more source
Metals, 2023 The in situ small punch (SP) test method is a simple screening technology developed to assess the hydrogen embrittlement (HE) characteristics of structural steels.
Hyung-Seop Shin +5 more
doaj +1 more source
The small punch test: An overview of previous research
Multidiszciplináris Tudományok, 2023 The knowledge of material properties is a key factor in designing structures which withstand the challenges of their lifetime. Small Punch (SP) test is a material testing method which has the advantage of lean material usage. In this study, an overview is presented on the SP testing method.
Benedek Kulcsár, Bernadett Spisák
openaire +1 more source
Advanced Engineering Materials, EarlyView.Controlling the Field Assisted Sintering Technology (FAST) parameters, dwell temperature and cooling rate, significantly influences the microstructural evolution in titanium aluminide GE4822. Significant γ‐lamellar colonies develop only upon cooling through the α‐transus.
Jack Krohn, James Pepper, Martin Jackson
wiley +1 more source
Ubiquity Proceedings, 2018 Miniature and standard specimens, were cut from the anisotropy materials with axial, central and radial directions to study the mechanical property. In the paper, main research focused on the small punch test (SPT) with un-notched and U-shaped notched ...
K. Guan +3 more
doaj +1 more source
Effects of punch geometry and grain size in micron scale compression molding of copper
Materials & Design, 2021 Mechanical size effects at small characteristic dimensions are of intense current interest. In addition to the relevance for microfabrication, microscale compression molding provides a rich laboratory in which mechanical size effects manifest in ...
Bin Zhang, W.J. Meng
doaj +1 more source
Advanced Engineering Materials, EarlyView.This study explores the discrepancies between bulk mechanics and spatial mapping in a tissue‐mimetic hydrogel model. Microplastic particles create localized stiff mechanical microenvironments that are detectable by cellular‐scale nanoindentation but leave bulk properties unchanged as measured by rheology.
Ahron T. Verschleisser +3 more
wiley +1 more source
Evaluating the tensile properties of high-strength stainless steels using small punch testing
Science ProgressAccurately measuring the mechanical properties of high-strength stainless steels is of great significance for ensuring structural safety, predicting long-term performance and optimizing design.
Ran Li +4 more
doaj +1 more source