Results 201 to 210 of about 2,082,533 (233)
Some of the next articles are maybe not open access.

High-power thulium-doped fiber laser in an all-fiber configuration

SPIE Proceedings, 2016
High-power Tm-doped fiber lasers are greatly suitable for various applications, such as material processing, medicine, environmental monitoring and topography. In this work we present an all-fiber narrowband CW laser in near fundamental mode operation based on a Tm-doped double-clad active fiber pumped by 793 nm laser diodes with a central wavelength ...
Baravets, Y. (Yauhen)   +2 more
openaire   +2 more sources

Ultrafast thulium-doped fiber laser mode locked with black phosphorus

Optics Letters, 2015
We report, for the first time to our knowledge, the usage of black phosphorus (BP) as a saturable absorber for the mode locking of a thulium-doped fiber laser. We have experimentally shown that BP exhibits saturable absorption in the 2 μm wavelength range and supports ultrashort pulse generation.
Jaroslaw, Sotor   +5 more
openaire   +2 more sources

Thulium-doped all-fiber mode-locked laser synchronously pumping by a fiber laser

SPIE Proceedings, 2016
We demonstrate a thulium-doped all fiber actively mode-locked laser by synchronously pumping without electronic modulator. A mode-locked fiber laser operating at 1550 nm based on nonlinear polarization rotation (NPR) is innovatively utilized as the pulsed pump.
Gen Li   +6 more
openaire   +1 more source

Magnetron-sputtering deposited WTe_2for an ultrafast thulium-doped fiber laser

Optics Letters, 2017
Ultrafast pulse generation was demonstrated in a thulium-doped fiber laser mode-locked by magnetron-sputtering deposited WTe2 with a modulation depth, a nonsaturable loss, and a saturable intensity of 31%, 34.3%, and 7.6  MW/cm2, respectively. Stable soliton pulses could be obtained at a 1915.5 nm central wavelength with a pulse duration of 1.25 ps, an
Jintao Wang   +8 more
openaire   +2 more sources

Efficient double-clad thulium-doped fiber laser with a ring cavity

Applied Optics, 2001
We have constructed a novel ring cavity for a double-clad thulium-doped fiber laser, by placing the fiber's 45 degrees angle-polished output end before the input end and relaunching the pump and the laser power into the fiber. This design can reduce reabsorption by using short fibers without loss of pump efficiency.
J, Xu   +4 more
openaire   +2 more sources

All fiber thulium-doped fiber laser pumped Q-switched Ho:YAP laser

SPIE Proceedings, 2017
The high power infrared 2μm lasers have been extensively investigated for a number of commercial, scientific and engineering applications, such as remote chemical sensing, medical diagnostics, eye-safe laser radar, and environmental monitoring. Furthermore, high-power 2μm lasers are effective pump sources of optical parametrical oscillators and optical
Ting Yu   +9 more
openaire   +1 more source

Longitudinally Segmented Thulium-Doped Fiber for High-Power Fiber Lasers

Optica Laser Congress Congress 2025
Thulium-doped fiber laser using a longitudinal gradient of doping to reduce the heat load local maxima is presented. Laser achieved 50 W of output power at 1939 nm with a slope efficiency exceeding 62 %.
Bára Švejkarová   +10 more
openaire   +1 more source

Thulium-doped Fluorozirconate Fiber Laser At 2.3μm

Conference Proceedings LEOS Lasers and Electro-Optics Society, 2005
L. Esterowitz, R. Allen, I. Aggarwal
openaire   +1 more source

Mode-locking of thulium-doped and Erbium-doped fiber lasers.

1997
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 1997. ; Includes bibliographical references (leaves 140-152). ; by Lynn Elizabeth Nelson. ; Ph.D.
openaire   +1 more source

Home - About - Disclaimer - Privacy