Results 81 to 90 of about 8,047,860 (162)

Influencia de la atmósfera inerte en la soldadura de acero aisi 304 por procedimiento tig con varillas de aporte aisi 308l, aisi 316l e incoel

, 2013
Proyecto ConfidencialAlonso Ortuño, MDD. (2008). Influencia de la atmósfera inerte en la soldadura de acero aisi 304 por procedimiento tig con varillas de aporte aisi 308l, aisi 316l e incoel.
Alonso Ortuño, Maria Dels Desamparats
core  

Study by X-ray diffraction of the residual stress produced during deposition of TiN thin films on metallic substrates

Revista Facultad de Ingeniería Universidad de Antioquia, 2010
The influence of film thickness and the substrate type on the level and type of residual stresses generated on TiN coatings are analyzed. Two different physical vapor deposition (PVD) techniques: Magnetron Sputtering and Ion Plating were applied.
Mónica Monsalve, Esperanza López, Juan Meza, Fabio Vargas   +3 more
doaj  

Effect of shot peening at different almen intensities on fatigue behavior of AISI 304

Metalurgija, 2018
AISI 304 stainless steel is a common material that is widely used in the extensive implant industry. The failure of this material, especially in bone implant applications, is affected by its fatigue load.
P. T. Iswanto, H. Akhyar, F. F. Utomo
doaj  

The effects of casting and forging processes on joint properties in friction-welded AISI 1050 and AISI 304 steels

, 2009
The aim of the present study was to investigate the effects of investment casting and forging process on the microstructure and mechanical properties of friction weldments, AISI 1050-AISI 304. A continuous-drive friction welding device with the automatic
Sahin, Mumin, Sunay, Tolga Y., Altintas, Sabri   +2 more
core   +1 more source

Intergranular Corrosion Analysis of Austenitic Stainless Steels in Molten Nitrate Salt Using Electrochemical Characterization

Metals
This study investigates the influence of molten nitrate salt exposure on the intergranular corrosion (IGC) behavior of three grades of austenitic stainless steel (namely, AISI 304, AISI 304H, and AISI 321H).
Noparat Kanjanaprayut, Thamrongsin Siripongsakul, Piyorose Promdirek   +2 more
doaj   +1 more source

PENGUJIAN SAMBUNGAN PADA PROSES PENGELASAN GESEK BEDA LOGAM ANTARA ST 60 DENGAN AISI 304 [PDF]

, 2011
Pengelasan gesek merupakan salah satu metode penyambungan yang dikenal dalam proses produksi. Metode ini sering dipakai dalam proses produksi yang melibatkan penyambungan material beda jenis.
Sugiyanto, Ir. DEA, Mardiyono, Ahmad
core   +1 more source

Effetti dell'interazione con l'ambiente sull'usura a secco di un acciaio inossidabile austenitico AISI 304.

, 1991
Studio del comportamento tribologico di un acciaio Aisi 304 in presenza di varie percentuali di ...
BORRUTO, Adelina Teresa Maria, BIGGIERO, Giovanni   +1 more
core  

Zinc Element Traces to Inhibit Scale Formation on Cooling Tower and Air Cooler Systems

Iraqi Journal of Chemical and Petroleum Engineering, 2013
Calcium carbonate is predominantly present in aqueous systems, which is commonly used in industrial processes. It has inverse solubility characteristics resulting in the deposition of scale on heat transfer surface.
Shaymaa Abdul Rahman Ahmed Reshan
doaj  

Tensile and fracture characteristics of austenitic stainless steel: Effect of strain rates and subzero temperatures

Results in Engineering
This study focuses on tensile and fracture characteristics of AISI 304 austenitic stainless steel (ASS) at sub-zero temperatures. The test was performed at room and sub-zero temperature of − 30 ∘ C (243 K), − 60 ∘ C (213 K), and − 80 ∘ C (193 K) under ...
Abdisa Sisay Mekonnin, Krzysztof Wacławiak, Antonio Atienza Márquez   +2 more
doaj   +1 more source

Kinetics of Nickel Diffusion into Austenitic Stainless Steels AISI 304 and 316L and Calculation of Diffusion Coefficients. [PDF]

Materials (Basel), 2023
Bukovská Š, Moravec J, Švec M.
europepmc   +1 more source