Results 61 to 70 of about 4,797 (308)
The problem of distinguishing and classifying the responses of analog integrated circuits containing catastrophic faults has aroused recent interest. The problem is made more difficult when parametric variations are taken into account. Hence, statistical
Chalk, C D +7 more
core +1 more source
Creep Properties and Deformation Mechanism of Additively Manufactured NiAl‐CrMo Composites
Additively manufactured NiAl‐CrMo composites contain numerous interfaces and cell boundaries that control their creep response. At 700°C under high applied stress, creep is dominated by dislocation‐controlled power‐law mechanisms. At 800°C–900°C and lower stresses, creep is primarily diffusion‐controlled along cell boundaries.
Jan Vollhüter +9 more
wiley +1 more source
Soft Mechanical‐Electrical Logic Using Liquid Metal‐Filled 3D‐Printed Architectures
We present 3D‐printed soft mechanical–electrical logic elements that use liquid metal–filled silicone tubes actuated by thermoplastic polyurethane/polylactic acid (TPU/PLA) architectures to produce Boolean operations. Complementary normally open and normally closed unit cells perform repeatable binary transitions and can be combined into more complex ...
Christoph Lehmann +2 more
wiley +1 more source
Enhanced Strength and Corrosion Resistance of Ti‐13Nb‐12Ta‐10Zr‐4Sn Alloy by Aging Treatment
This work systematically investigates the effect of aging treatment on mechanical properties and corrosion behavior of vacuum arc‐melted Ti‐13Nb‐12Ta‐10Zr‐4Sn alloy. Owing to the increased α″ martensite, strength and corrosion resistance were significantly enhanced by aging treatment.
Yuhua Li +5 more
wiley +1 more source
The unconstrained evolution has already been applied in the past towards design of digital circuits, and extraordinary results have been obtained, including generation of circuits with smaller number of electronic components.
Kalganova, T +3 more
core +1 more source
A capacitive mismatch calibration method for SAR ADCs based on TDC
The capacitance mismatch problem limits the accuracy improvement of high‐precision SAR ADCs (Successive Approximation Register Analog‐to‐Digital Converters).
Qing Shen +5 more
doaj +1 more source
Grain boundary triple junctions are an essential ingredient of the microstructure of polycrystalline materials. In this study, a triple junction is observed using atomic‐resolution scanning transmission electron microscopy and characterized. Computer simulations reveal that the junction has a dislocation character that is determined by the joining ...
Tobias Brink +4 more
wiley +1 more source
Edible electronics needs integrated logic circuits for computation and control. This work presents a potentially edible printed chitosan‐gated transistor with a design optimized for integration in circuits. Its implementation in integrated logic gates and circuits operating at low voltage (0.7 V) is demonstrated, as well as the compatibility with an ...
Giulia Coco +8 more
wiley +1 more source
Integrated analogue–digital control circuit for photonic switch matrices
An analogue–digital circuit for thermal control of the resonance frequency of optical ring resonators is suggested. This approach is characterised by a low power dissipation of 209 µW and needs only 2800 µm 2 of chip area in 0.16 µm CMOS technology.
R. Enne +4 more
openaire +1 more source
A push–pull FVF LDO with full‐spectrum PSR and fast transient response
A push–pull low‐dropout regulator based on flipped voltage follower is proposed and designed in 65 nm CMOS, which has a push‐current mode and a pull‐current one.
Heng Zheng +4 more
doaj +1 more source

