Results 51 to 60 of about 47,401 (167)
This study primarily simulates the flashover phenomenon between the metal fittings (rods) and the skirt surface (plates) of insulators when water droplets traverse between them under heavy rain conditions.
Jianli Zhao +4 more
doaj +1 more source
The c-C4F8 gas is considered to have great potential as a gaseous medium for use in gas-insulated equipment due to its good insulation properties and its relatively low greenhouse gas potential (Global warming potential, GWP) relative to SF6.
Song Xiao +6 more
doaj +1 more source
Electrical Discharge Triggered Breakdown Phenomena in Main Gap
In high-voltage techniques, electrical discharges represent complex problem. The results of the research on the breakdown phenomena in high voltage electrical apparatus insulated by gas can be employed to obtain external and internal insulation design ...
abderrahmane settaouti
doaj
2 kV Al0.64Ga0.36N-channel high electron mobility transistors with passivation and field plates
High voltage (∼2 kV) Al _0.64 Ga _0.36 N-channel high electron mobility transistors were fabricated with an on-resistance of ∼75 Ω. mm (∼21 mΩ. cm ^2 ). Two field plates of variable dimensions were utilized to optimize the breakdown voltage.
Md Tahmidul Alam +7 more
doaj +1 more source
This study examines and compares the breakdown and aging properties of five insulating liquids. Additionally, the influence of different voltage polarities on these properties was analyzed to investigate the effect of aging on polarity behavior under ...
Sabrina Krügel, Ronald Plath
doaj +1 more source
Characteristics and Breakdown Behaviors of Polysilicon Resistors for High Voltage Applications
With the rapid development of the power integrated circuit technology, polysilicon resistors have been widely used not only in traditional CMOS circuits, but also in the high voltage applications.
Xiao-Yu Tang, Ke Dong
doaj +1 more source
Experimental Study on Breakdown Characteristics of Transformer Oil Influenced by Bubbles
Bubbles will reduce the electric strength of transformer oil, and even result in the breakdown of the insulation. This paper has studied the breakdown voltages of transformer oil and oil-impregnated pressboard under alternating current (AC) and direct ...
Chunxu Qin +5 more
doaj +1 more source
Impulse Breakdown Characteristics of Main Gap in the Presence of a Local Discharge
The characteristics of impulse breakdown voltages and the influence of the position of third electrode in air gap are investigated experimentally to study the parameters influencing the breakdown voltage in the presence of metallic objects around the ...
Abderrahmane Settaouti
doaj +1 more source
An AC-DC combined voltage is applied to the oil-pressboard insulation near the valve side during the operation of a converter transformer. To study the breakdown characteristics of an oil-pressboard insulation under such voltages, a typical plate ...
Qingguo Chen +3 more
doaj +1 more source
Statistical inferences for breakdown voltages
This paper examines some analysis of breakdown voltages, and gives diagrams and arguments to support re-analysis of the relevant data sets, again using the three parameter Weibull distribution. The paper shows that graphical means provide a useful method for examining the log-likelihood of data, particularly when careful examination of this function is
openaire +3 more sources

