Results 1 to 10 of about 51,283 (291)
Effect of laser remelting on the cavitation erosion behaviors of high-velocity arc-sprayed Fe-based amorphous coating in different medium [PDF]
Ultrasonics SonochemistryIn this study, high-velocity arc spraying (HVAS) technology was utilized to prepare Fe-based amorphous coating. Then, post-treatment of the coating was conducted using laser remelting (LR) technology to achieve metallurgic interfacial bonding at the ...
Ge Gao +4 more
doaj +2 more sources
Determination of resistance to cavitation of pyrophyllite samples
Zaštita Materijala, 2021 The resistance under the action of cavitation of sintered pyrophillite samples was investigated. The initial sample of pyrophillite from the Parsovic-BiH deposit was ground a vibrating mill to a granulation of 20 mm, pressed and sintered at temperatures (
Dragan Radulović +2 more
doaj +1 more source
Materials & Design, 2021 An understanding of the cavitation erosion behavior and mechanisms of high‑nitrogen austenitic stainless steel is of interest for scientific and economic reasons.
Zhenhua Wang, Bing Zhang
doaj +1 more source
Research Progress of New Cavity - Resistant Coatings [PDF]
Cailiao Baohu, 2022 The causes and protective measures of cavitation erosion were summarized. The cavitation corrosion resistance of different kinds of metal coatings prepared by thermal spraying, surfacing, electroless plating and plasma surface technology was introduced ...
YANG Yu-wei, WANG Xuan, YU Hong-wei, XU Chao-yang
doaj +1 more source
Microstructural and Cavitation Erosion Behavior of the CuAlNi Shape Memory Alloy
Metals, 2021 Microstructural and cavitation erosion testing was carried out on Cu-12.8Al-4.1Ni (wt. %) shape memory alloy (SMA) samples produced by continuous casting followed by heat treatment consisting of solution annealing at 885 °C for 60 min and, later, water ...
Tatjana Volkov-Husović +7 more
doaj +1 more source
Study on Cavitation and Corrosion Resistances of Thermally Sprayed Coatings and Electroplated Coatings [PDF]
Cailiao Baohu, 2022 In the field of material protection coating, there is a market demand for replacing the traditional electroplating process with the thermal spraying process, but supporting information in the aspects of the cavitation and corrosion resistances of ...
DUAN Jun, CHEN Zhao - jian, JIN Juan, JI Xiu - lin
doaj +1 more source
Cavitation erosion behavior of nickel foam/polyurethane co-continuous composite
Materials Research Express, 2021 The cavitation erosion behavior of Ni foam/polyurethane (PU) co-continuous composites under different experimental conditions was investigated using an ultrasonic vibration cavitation erosion device.
J X Wang +4 more
doaj +1 more source
Mechanisms and morphologies of cavitation damage of NN 70 steel
Zaštita Materijala, 2021 Broken test tubes for low-cycle fatigue testing of Nionicral 70 (NN-70) parent material (PM) steel and simulated heat-affected zones (SHAZ) were used to produce samples for cavitation resistance testing.
Vujadin Aleksić +2 more
doaj +1 more source
RESISTANCE OF TITANIUM ALLOYS TO CAVITATION WEAR
Problems of Atomic Science and Technology, 2022 The wear rate of titanium alloys VT1-0, TC5, VT6, VT14, OT4 under the action of microshocks due to cavitation, which is created in distilled water under the surface of the ultrasonic wave emitter, were determined. It was found that the increase in hardness and improvement of cavitation wear resistancefor these alloys depends on the alloying elements ...
Klimenko, І.О. +7 more
openaire +2 more sources
Journal of Materials Research and Technology, 2023 The surface of marine fluid operating machinery is commonly damaged by cavitation, and the protection of its surface is one of the key technologies in contemporary marine industry.
Yuanhang Zhou +7 more
doaj +1 more source