Results 41 to 50 of about 37,675 (355)

Microstructure and mechanical properties of SiO2-BN ceramic and Invar alloy joints brazed with Ag–Cu–Ti+TiH2+BN composite filler

Journal of Materiomics, 2016
Ag–Cu–Ti + TiH2+BN composite filler was prepared to braze SiO2-BN ceramic and Invar alloy. The interfacial microstructure, mechanical properties, and residual stress distribution of the brazed joints were investigated.
Y. Wang, Z.W. Yang, L.X. Zhang, D.P. Wang, J.C. Feng   +4 more
doaj   +1 more source

Effect of electropulsing on the solidification of mould flux

Journal of Materials Research and Technology, 2022
The effect of electropulsing on the microstructure formation in solidification of mould flux has been investigated. Experimental characterization and image analysis reveals that the electropulsing treatment reduces 46% porosity and increases the ...
Ashutosh G. Bhagurkar, Rongshan Qin
doaj   +1 more source

Application Progress of PALS in the Correlation of Structure and Properties for Graphene/Polymer Nanocomposites

Nanomaterials, 2022
Giving a deep insight into the microstructure, and realizing the correlation between microstructure and properties is very important to the precise construction of high-performance graphene/polymer nanocomposites (GPN).
Xiaobing Han, Jie Gao, Tao Chen, Libing Qian, Houhua Xiong, Zhiyuan Chen   +5 more
doaj   +1 more source

Microstructure, shear properties and corrosion resistance of Cu/Cu-In/Cu solder joints

Journal of Advanced Joining Processes, 2022
Transient liquid phase sintering can successfully fabricate reliable high-temperature solder joints at a relatively low joining temperature by forming intermetallic compounds.
Li Liu, Bo Zhao, Bang Jiang, Zhiwen Chen, Wei Huang, Zhou Luo, Song Du, Chunhua Zhang   +7 more
doaj   +1 more source

Microstructure and hardness of SAC305 and SAC305-0.3Ni solder on Cu, high temperature treated Cu, and graphene-coated Cu substrates

Results in Physics, 2018
In this study, SAC305 and SAC305-0.3Ni solder balls were soldered onto Cu, high temperature treated Cu (H-Cu) and graphene coated Cu (G-Cu) substrates, respectively. The microstructure, the interfacial reaction, and the hardness of the solder joints were
Shengli Li, Yang Liu, Hao Zhang, Hongming Cai, Fenglian Sun, Guoqi Zhang   +5 more
doaj   +1 more source

Study of corrosion mechanism of cast iron in molten aluminum

Materials Research Express, 2020
The corrosion mechanism of three aluminum ingot mold materials used by Chinese aluminum electrolytic enterprises in molten aluminum was studied: The three materials are pearlite cast iron(PCI) contains vermicular graphite, lamellar graphite, and ...
Qiyu Wang, Hui yang, Xiaohong Li, Guodong Zhang   +3 more
doaj   +1 more source

Microstructural Evolution Based on Fundamental Interfacial Properties [PDF]

, 2003
This first CMSN project has been operating since the summer of 1999. The main achievement of the project was to bring together a community of materials scientists, physicists and mathematicians who share a common interest in the properties of interfaces and the impact of those properties on microstructural evolution.
Rollett, A. D., Srolovitz, D. J., Karma, A.   +2 more
openaire   +2 more sources

Enhancing interfacial strength of T-joint for vacuum-brazed thin-walled structures comprising TiAl and GH3536 alloys via in-situ synthesis of Al2TiO5 ceramic coatings

Journal of Materials Research and Technology, 2023
The joining of dissimilar materials to fabricate lightweight components of thin-walled structures for aerospace applications has garnered significant interest.
X.G. Song, Y. Luo, S.P. Hu, Y.X. Wang, Y.Z. Liu, J. Cao   +5 more
doaj   +1 more source

Interfacial microstructure and shear strength of Ti-6Al-4V/TiAl laminate composite sheet fabricated by hot packed rolling

, 2011
A two layer Ti-6Al-4V(wt%)/Ti-43Al-9V-Y(at%) laminate composite sheet with a uniform interfacial microstructure and no discernible defects at the interfaces has been prepared by hot-pack rolling, and its interfacial microstructure and shear strength were
Chen, Yuyong, Yuyong Chen, Kong, Fantao, Fantao Kong, Deliang Zhang, Zhang, Deliang   +5 more
core   +1 more source

Effect of Carbon Fiber Surface Microstructure on Composite Interfacial Property Based on Image Quantitative Characterization Technique

, 2021
The surface roughness (Ra) and composite interfacial property of carbon fiber (CF) are considered to be mainly affected by the microstructure of the CF surface.
Shu Xiong, Yan Zhao, Jiupeng Song
core   +1 more source