Results 81 to 90 of about 5,716,928 (282)

Development of decoration and preferential-etching methods for delineation of crystal defects in semiconductor materials [PDF]

, 2013
Silicon wafers such as Silicon on Insulator (SOI) and strained silicon on Insulator (sSOI) are the essential and basic materials of advanced microelectronic devices.
Idrisi, Hanan
core  

CO2‐to‐CO Conversion in a Gas‐Fed, Zero‐Gap, PEM Electrolyzer Enabled by Polycations and Nitrogen‐Doped Carbon‐Supported Cobalt Nanoparticles

Advanced Functional Materials, EarlyView.
A gas‐fed, zero‐gap, PEM CO2 electrolyzer is realized by incorporating PDDA+ ions onto the carbonaceous Co/N‐C electrocatalyst, with gaseous H2 and CO2 fed into the anode and cathode, respectively. Operating without an aqueous electrolyte, the system sustains a peak FECO of 65.1% at 100 mA cm−2. ABSTRACT Electrochemical carbon dioxide reduction (ECO2R)
Yuen Leong Chow, Hsi‐Wen Wu, Aimin Li, Yalou Guo, Duhong Chen, Jie Zhang, Paul A. Webley   +6 more
wiley   +1 more source

Wet chemical poly-Si(n) wrap-around removal for TOPCon solar cells

EPJ Photovoltaics
This work gives an overview on different technological solutions for polysilicon removal in industrial tunnel oxide passivated contact (i-TOPCon) n-type silicon solar cell fabrication.
Krieg Katrin, Mack Sebastian, Vollmer Jan, Dannenberg Tobias, Brunner Damian, Zimmer Martin   +5 more
doaj   +1 more source

Advances in Solution‐Processed Textile Triboelectric Nanogenerators: Ink Formation, Processing Strategies, Applications, and Challenges

Advanced Functional Materials, EarlyView.
Advanced ink systems for solution‐processed textile triboelectric nanogenerators are systematically summarized, spanning conductive, tribo‐negative, and tribo‐positive layers. By connecting ink chemistry, deposition methods, and device function, the present review reveals the key governing principles of solution development and highlights practical ...
Xinlong Sun, Stephen Beeby
wiley   +1 more source

Estimation of the Optimum Etching Time and Etching Parameters for CR-39 Nuclear Tracks Detector by Applying Plasma and Chemical Etching Techniques

Al-Mustansiriyah Journal of Science
Background: CR-39 nuclear track detectors are widely used in various fields, including science, technology, astronomy, and environmental preservation, to detect and register heavy ions, neutrons, and alpha particles.
Abdulkader Makki Dahham, Jamoliddin Razzokov, Eldor Karimbaev, Raghad S. Mohammed   +3 more
doaj   +1 more source

Nitride MXenes Beyond Carbides: Bridging the Gap Between Computational Prediction and Experimental Realization

Advanced Functional Materials, EarlyView.
Nitride MXenes remain constrained by a persistent gap between computational prediction and experimental realization. This Review identifies the thermodynamic, kinetic, and chemical barriers limiting their synthesis, critically evaluates emerging fabrication routes, and proposes a multidimensional computational‐experimental framework to accelerate the ...
Naresh Varnakavi, Masoud Soroush
wiley   +1 more source

Structure‐Property Relationships in Catecholamine Coatings for Broad Surface Functionalization

Advanced Functional Materials, EarlyView.
Inspired by mussel adhesive proteins (MAPs), six catecholamine molecules with different molecular structure were systematically characterized and compared based on their ability to form homogeneous, reactive coatings. Highlighting candidates capable of balancing coating properties of interest, their successful use as primer layers for organic and ...
Caroline F. Harms, Qiming Li, Ye‐Sol Kim, Anish Tuteja, Jinsang Kim, Abdon Pena‐Francesch   +5 more
wiley   +1 more source

Out‐of‐Plane Strain‐Decoupled Architecture for High‐Fill‐Factor Stretchable OLED Displays

Advanced Functional Materials, EarlyView.
A vertically decoupled multilayer SOLED architecture separates emissive pixel islands from deformable interconnects, allowing low‐modulus elastomeric layers to accommodate applied strain and suppress strain transfer to the OLED region. This design, combined with transparent hybrid encapsulation, enables a high fill factor (∼75%), stretchability ...
Young Hyun Son, Kyung Cheol Choi, Jeong Hyun Kwon   +2 more
wiley   +1 more source

Optimization of selective laser-induced etching (SLE) for fabrication of 3D glass microfluidic device with multi-layer micro channels

Micro and Nano Systems Letters, 2019
We present the selective laser-induced etching (SLE) process and design guidelines for the fabrication of three-dimensional (3D) microfluidic channels in a glass.
Sungil Kim, Jeongtae Kim, Yeun-Ho Joung, Sanghoon Ahn, Jiyeon Choi, Chiwan Koo   +5 more
doaj   +1 more source

Current‐Driven Chirality Detection of Magnetic Textures in Cylindrical Nanowires

Advanced Functional Materials, EarlyView.
Current‐assisted anisotropic magnetoresistance measurements in individual Ni/Au cylindrical nanowires enable detection of vortex chirality near Au segments and selective magnetic reversal in defined wire sections at magnetic fields lower than the propagation field. This approach provides a simple, cost‐effective, and non‐invasive method for probing and
Javier Rial, Alejandro Rivelles, Sofia Caspani, Célia T. Sousa, Rodrigo Guedas, José Luis Prieto, Mariana P. Proença   +6 more
wiley   +1 more source