Results 21 to 30 of about 37,330 (309)
Characteristics of Timbers Dried Using Kiln Drying and Radio Frequency-Vacuum Drying Systems
MATEC Web of Conferences, 2017 Heavy hardwoods are difficult-to-dry timbers as they are prone to checking and internal stresses when dried using a conventional kiln drying system. These timbers are usually dried naturally to reach 15% to 19% moisture content with an acceptable defects.
Rabidin Zairul Amin +2 more
doaj +1 more source
International Journal of Applied Sciences and Smart Technologies, 2021 The purpose of this study is to determine the effect of the presence of a fan in the wood drying room in the drying time of wood. In addition, it is also to determine the performance of the steam compression cycle engine used in wood drying machines and ...
Wibowo Kusbandono +1 more
doaj +1 more source
Model and simulation of a solar kiln with energy storage [PDF]
, 2010 A solar kiln with energy storage can be used for continuous drying. This kiln consisted of several units which were modeled to simulate it in operation.
LUNA, David +2 more
core +1 more source
HUBUNGAN SIFAT DASAR DAN SIFAT PENGERINGAN LIMA JENIS KAYU ANDALAN JAWA BARAT
Jurnal Penelitian Hasil Hutan (Journal of Forest Products Research), 2017 This study was intended to investigate the relation between basic properties and drying properties of five priority wood species, i.e. pulai kongo (Alstonia congensis Engl.), kibawang (Azadirachta excelsa Jack.), salamander (Grevillea robusta A.Gunn ...
Efrida Basri, Nurwati Hadjib
doaj +1 more source
Moisture transport dynamics in wood during drying studied by long-wave near-infrared hyperspectral imaging [PDF]
, 2022 The complexities of wood microstructure cause difficulties in understanding water movement characteristics during drying. Here, the water transport dynamics in softwood (Japanese cypress) with different sample lengths (30 mm, 60 mm, and 90 mm) and ...
Tsuchikawa, Satoru +3 more
core +1 more source
The Impact of Drying Conditions on the Surface Color Changes of Pine Wood
BioResources, 2023 The article presents the impact of drying process and selected parameters on the color changes on the surface of pine wood (Pinus sylvestris L.). Three predetermined process conditions (modes), mild, normal, and intensive, were investigated.
Aleksandra Suchta +4 more
doaj +2 more sources
Jurnal Penelitian Hasil Hutan (Journal of Forest Products Research), 2017 This paper discusses the drying properties of sengon (Paraserianthes falcataria) from plantation forest and natural forest. The material used in the study were selected from 5, 15 and 25 year old plantation forest in Jawa Timur, and from natural forest ...
Efrida Basri, Syarif Hidayat
doaj +1 more source
Mathematical modeling the drying of poplar wood particles in a closed-loop triple pass rotary dryer
, 2022 S.55-67Closed-loop drying systems are an attractive alternative to conventional drying systems because they provide a wide range of potential advantages. Consequently, type of drying process is attracting increased interest.
Layeghi, M. +4 more
core +1 more source
BioResources, 2016 Impregnating wood, assisted with ultrasound technology, could improve the impregnation efficiency by improving the permeability of wood, thus affecting the subsequent drying process.
Zijian Zhao +3 more
doaj +1 more source
Drying performance, as well as physical and flexural properties of oil palm wood dried via the super-fast drying method [PDF]
, 2021 Effects of incising parameters were studied relative to the drying performance and properties of super–fast dried oil palm wood. Different incising depths (1/3, 1/2, 2/3, and 100% of the total thickness) and distance (38 mm and 50 mm) were made on the ...
Ramli, Farid +6 more
core