Results 11 to 20 of about 26,802 (305)
Engineering Structures, 2011 A three-dimensional finite element model is developed, validated and used in the parametric study to investigate the influence of shear stud's position and profiled sheeting thickness on the strength, ductility and failure modes of the headed shear stud welded to the modern profiled sheeting.
Qureshi, J., Lam, Dennis, Ye, J.
openaire +5 more sources
Behavior of an Advanced Bolted Shear Connector in Prefabricated Steel-Concrete Composite Beams. [PDF]
Materials (Basel), 2019 Chen J +8 more
europepmc +2 more sources
Study on the shear performance of new type interpenetrating composite plate connector
AIP Advances, 2022 A new kind of epoxy resin/foam nickel–iron plate connector is introduced. This kind of interpenetrating composite connector has approximate thermal insulation performance of the resin, good mechanical properties, and easy manufacture and production. This
Xiaoxing Wang +3 more
doaj +1 more source
Applied Sciences, 2021 Three types of connectors were proposed and tested for a modular double-skinned composite tubular (DSCT) wind turbine tower, which is composed of two concentric steel tubes filled with concrete between them.
Sungwon Kim, Hyemin Hong, Taek Hee Han
doaj +1 more source
DEFORMATION CAPACITY AND DUCTILITY OF SHEAR CONNECTORS
ce/papers, 2023 AbstractDeformation capacity and slip range (eventually called “ductility”) of shear connectors are key parameters for the design of shear connectors in composite beams, especially in partial shear connection. Existing design rules require a deformation capacity of at least 6 mm for the use of shear connectors with plastic design methods.
Baertschi, Roland +3 more
openaire +2 more sources
Numerical simulation of shear capacity of lightweight aggregate concrete stud connectors [PDF]
E3S Web of Conferences, 2021 In order to study the mechanical properties of the stud connectors in lightweight aggregate concrete (LWAC), the finite element software ABAQUS was used to establish the push test models of ordinary concrete and LWAC, respectively.
Lin Hao, Lei Liu, Jian Li
doaj +1 more source
Research on Angle Connector in Composite Beam
International Journal of Concrete Structures and Materials, 2022 As a critical component for steel beam and concrete slab to work together, the strength of the shear connector affects the flexural load capacity and stiffness of the composite beam.
Kewei Ding +5 more
doaj +1 more source
Shear Capacity of Demountable Shear Connectors
Proceedings of the 10th International Conference on Advances in Steel Concrete Composite and Hybrid Structures, 2012 No Much of the environmental impact of buildings is associated with consumption of resources and generation of waste. The construction industry in Europe consumes over 70,000 million tonnes of a wide range of materials each year, and generates over 250 million tonnes of waste. Reducing waste is a priority for all the European Governments.
Lam, Dennis, Saveri, E.
openaire +2 more sources
Testing of continuous shear connector
IOP Conference Series: Materials Science and Engineering, 2020 Abstract Composite steel-concrete bridges are one of the most recent additions to the bridge science. By joining the two of the most commonly used materials it is possible to use their strengths combined. This was firstly presented for composite ceilings. It was assembled by encasing the whole I-beams into the concrete deck. Nowadays, it
P Vaňová, V Kvočák
openaire +1 more source
Behaviour of Corroded Single Stud Shear Connectors [PDF]
Materials, 2017 In this study, the effect of corrosion on the static behavior of stud shear connectors was investigated. An innovative test setup for single stud shear connectors was designed and established. Two series of specimens having different stud diameters were fabricated and tested.
Xue, Wen, Chen, Ju, Zhu, Ji-Hua
openaire +2 more sources