Results 71 to 80 of about 118,785 (293)

Four‐Point Bending Tests at High Temperatures on Commercial MgO‐C Refractory Bricks with and Without Recyclate Considering Different Carbon Contents

open access: yesAdvanced Engineering Materials, EarlyView.
Four‐point bending tests are conducted in an argon atmosphere on commercial MgO‐C brick grades with and without MgO‐C recyclate from room temperature up to 1300 °C. No detrimental effect of the MgO‐C recyclates on bending strength is found. Instead, a decisive influence of the total carbon content is observed, with lower total carbon contents ...
Alexander Schramm   +5 more
wiley   +1 more source

Orally Disintegrating Tablets Containing Melt Extruded Amorphous Solid Dispersion of Tacrolimus for Dissolution Enhancement

open access: yesPharmaceutics, 2018
In order to improve the aqueous solubility and dissolution of Tacrolimus (TAC), amorphous solid dispersions of TAC were prepared by hot melt extrusion with three hydrophilic polymers, Polyvinylpyrrolidone vinyl acetate (PVP VA64), Soluplus® and ...
Poovizhi Ponnammal   +4 more
doaj   +1 more source

Nano-crystalline inclusions as a low-pass filter for thermal transport in a-Si

open access: yes, 2015
We use atomistic simulations to study the resonant acoustic modes and compare different calculations of the acoustic mean-free path in amorphous systems with nanometric crystalline spherical inclusions.
Damart, Tanguy   +2 more
core   +3 more sources

Laser irradiation to produce amorphous pharmaceuticals [PDF]

open access: yes, 2016
Using a high-power CO2 laser to irradiate powder beds, it was possible to induce phase transformation to the amorphous state. Irradiation of a model drug, indometacin, resulted in formation of a glass.
Basit, AW   +3 more
core   +1 more source

Investigation of Thermo‐Chemical Processes in Commercial MgO‐C Refractory Bricks With and Without MgO‐C Recyclate at Elevated Temperatures

open access: yesAdvanced Engineering Materials, EarlyView.
This study investigates thermo‐chemical processes during high‐temperature testing of two commercial MgO‐C brick grades, one containing 47.5 wt.% MgO‐C recyclate. Using ETV, DTA/TG‐MS, XRD, and SEM/EDS/EBSD, mechanisms such as carbothermal reduction of magnesia, impurity incorporation into the secondary MgO surface layer, and calcium‐rich phase ...
Alexander Schramm   +6 more
wiley   +1 more source

DEVELOPMENT OF SUSTAINED RELEASE TABLETS CONTAINING SOLID DISPERSIONS OF BACLOFEN

open access: yesJournal of Fundamental and Applied Sciences, 2015
Sustained release tablets containing solid dispersions granules of a poorly water soluble drug were prepared to investigate the controlled release of the drug.
K. H. Janardhana   +4 more
doaj   +1 more source

Characterization and Characteristics of mechanochemically synthesized amorphous fast ionic conductor 50 SISOMO (50AgI-25Ag2O-25MoO3)

open access: yes, 2012
Mechanochemically synthesized amorphous 50SISOMO [50AgI-25Ag_2O-25MoO_3] fast ionic conductor shows high ionic conductivity of ~ 6x10^-3 {\Omega}^-1 cm-1 at room temperature.
Dayal, Saurabh, Shahi, K.
core   +1 more source

The Boson peak in supercooled water [PDF]

open access: yes, 2013
We perform extensive molecular dynamics simulations of the TIP4P/2005 model of water to investigate the origin of the Boson peak reported in experiments on supercooled water in nanoconfined pores, and in hydration water around proteins.
Kumar, Pradeep   +4 more
core   +2 more sources

Interaction of Ladle Slag With Varying SiO2 Content and Recyclate‐Based MgO–C Refractories

open access: yesAdvanced Engineering Materials, EarlyView.
Ladle slags (CaO/Al2O3 = 1) with 1–20 wt% SiO2 were investigated in contact with industrial MgO–C refractories fabricated from fresh magnesia and 50 wt% recyclate. The sessile drop method at 1600°C reveals intensive gas formation, delayed slag infiltration in recyclate‐based samples, and, under high‐SiO2 slag, formation of a dense MgAl2O4‐rich ...
Anton Yehorov   +6 more
wiley   +1 more source

Supersaturated Isotretinoin: Scrutiny into Solid States Attributes

open access: yesPharmaceuticals
Background/Objectives: The formulation development of Isotretinoin (ISN) is limited by its solubility and stability issues. This study aimed to characterise the BCS class II drug ISN, particularly the possible different solid state and formulate ...
Rana Sejare   +4 more
doaj   +1 more source

Home - About - Disclaimer - Privacy