Results 41 to 50 of about 603 (160)

Scaling of continuous twin screw wet granulation [PDF]

AIChE Journal, 2016
Scaling rules were developed and tested for a continuous twin screw wet granulation process using three scales (11, 16, and 24 mm barrel diameter) of twin screw granulators (TSG). The distributive feed screw configuration used produced high porosity granules (50–60%) with broad bimodal size distributions, especially in the 16 and 24 mm TSGs.
Osorio, J.G., Sayin, R., Kalbag, A.V., Litster, J.D., Martinez-Marcos, L., Lamprou, D.A., Halbert, G.W.   +6 more
openaire   +5 more sources

Analysis of the Influence of Process and Formulation Properties on the Drying Behavior of Pharmaceutical Granules in a Semi-Continuous Fluid Bed Drying System

Powders, 2023
In the last decade, twin-screw wet granulation became an essential technology for continuous pharmaceutical tablet production. Consequently, interest in (semi-)continuous fluidized bed drying systems as a subsequent processing unit has grown. In parallel,
Tuur Vandeputte, Michael Ghijs, Michiel Peeters, Alexander De Man, Daan Van Hauwermeiren, Eduardo Dos Santos Schultz, Tamas Vigh, Fanny Stauffer, Ingmar Nopens, Thomas De Beer   +9 more
doaj   +1 more source

Multi‐Material Additive Manufacturing of Soft Robotic Systems: A Comprehensive Review

Advanced Robotics Research, EarlyView.
This review explores the transformative role of multi‐material additive manufacturing (MMAM) in the development of soft robotic systems. It presents current techniques, materials, and design strategies that enable functionally graded and adaptive structures.
Ritik Raj, Quan‐Chen Song, Jia‐Yang Juang   +2 more
wiley   +1 more source

Twin Screw Melt Granulation: A Single Step Approach for Developing Self-Emulsifying Drug Delivery System for Lipophilic Drugs

Pharmaceutics, 2023
The current research aims to improve the solubility of the poorly soluble drug, i.e., ibuprofen, by developing self-emulsifying drug delivery systems (SEDDS) utilizing a twin screw melt granulation (TSMG) approach.
Dinesh Nyavanandi, Preethi Mandati, Sagar Narala, Abdullah Alzahrani, Praveen Kolimi, Sateesh Kumar Vemula, Michael A. Repka   +6 more
doaj   +1 more source

Scaling of Planar Sodium‐Nickel Chloride Battery Cells to 90 cm2 Active Area

Batteries &Supercaps, Volume 8, Issue 3, March 2025.
Large planar Na β′′ alumina electrolytes are prepared by tape‐casting and die‐pressing. These ceramic electrolytes are used to prepare planar sodium‐nickel chloride cells with 90 cm2 active area, providing a high capacity of 7 Ah. Successful cell cycling is demonstrated at 300 °C at rates up to C/4 (20 mA cm−2) for a cumulative capacity of 3.6 Ah cm−2.
T. Lan, E. Svaluto‐Ferro, N. Kovalska, G. Graeber, F. Vagliani, D. Basso, A. Turconi, M. Makowska, G. Blugan, C. Battaglia, M. V. F. Heinz   +10 more
wiley   +1 more source

The Influence of Equipment Design and Process Parameters on Granule Breakage in a Semi-Continuous Fluid Bed Dryer after Continuous Twin-Screw Wet Granulation

Pharmaceutics, 2021
The drying unit of a continuous from-powder-to-tablet manufacturing line based on twin-screw granulation (TSG) is a crucial intermediate process step to achieve the desired tablet quality.
Alexander Ryckaert, Michael Ghijs, Christoph Portier, Dejan Djuric, Adrian Funke, Chris Vervaet, Thomas De Beer   +6 more
doaj   +1 more source

3D‐Printed Models in Oral Surgery Simulation Training: A Scoping Review

Journal of Dental Education, EarlyView.
ABSTRACT Background Advancements in three‐dimensional (3D) printing have introduced innovative tools for medical and dental education. In dental surgery, 3D‐printed simulation models offer valuable presurgical training. This review explores the scope, study types, key findings, limitations, and future research needs to enhance their application in ...
Shahrzad Rahimizadeh Nahavandi, Leila Gholami, Amir Parham Pirhadi Rad, Morteza Ghojazadeh, Kevin Aminzadeh, Rana Tarzemany   +5 more
wiley   +1 more source

Fused Filament Fabrication and Recycling of Bio‐Based Polyamide 11 Reinforced With Recycled Short Carbon Fibers

Polymer Composites, EarlyView.
Fused Filament Fabrication and Recycling of Bio‐Based Polyamide 11 Reinforced With Recycled Short Carbon Fibers. Sample preparation, mechanical properties improvement after rCF addition and properties retainment after recycling. ABSTRACT This research investigates the fused filament fabrication (FFF) and recycling of bio‐based polyamide 11 (PA11 ...
Mirko Coser, Daniele Rigotti, Alessandro Pegoretti   +2 more
wiley   +1 more source

Optimizing Processing and Formulation Strategies for Enhanced Thermal and Chemical Stability of Meltblown Polyphenylene Sulfide Nonwovens

Polymer Engineering &Science, EarlyView.
PPS/PEI alloy fibers fabricated via meltblowing exhibit enhanced thermal stability with less than 10% shrinkage at 180°C, superior chemical resistance, and a high LOI of 34. ABSTRACT Polyphenylene sulfide (PPS) meltblown nonwovens are attractive for high‐performance filtration and protective applications owing to their intrinsic chemical resistance ...
Yi‐Cang Lai, Ying‐Chi Lin, Yuan‐Pei Liao, Ming‐Chih Kuo, Chin‐Wen Chen   +4 more
wiley   +1 more source

Material Development and Foam Extrusion Processing of Thermoplastic Starch‐Based Compounds

Polymer Engineering &Science, EarlyView.
Schematic representation of the project: a compound material based on thermoplastic starch and PBAT is developed for further processing in the foam extrusion process to achieve a flexible foam sheet with a low density and fine‐pored foam structure. ABSTRACT An investigation into the properties of starch‐based compounds is conducted to determine their ...
Tien Viet Anh Vu, Tatiana Andreiko, Lisa Leuchtenberger‐Engel, Christian Hopmann, Christina Eloo   +4 more
wiley   +1 more source